Tindie
TeHyBug
Mini WS2812/SK6812 Matrix WLED FastLED Controller
$9.99
TeHyBug Mini, WIFI Weatherstation and data logger
$19.00
WIFI Low Power Fishtank Temperature logger s4
$20.00
TeHyButton Mini, WIFI Water Leakage Sensor
$19.00
WIFI IoT Relay for your Smarthome with Tasmota FW
$9.99
GumPixel Coin-Size Pedestrian Safety-Flash-Light
$15.00
TeHyButton Mini, WIFI Open Door Sensor
$18.00
Micro WIFI IoT Relay for Smarthome with Tasmota FW
$17.00
Smart Wifi Server PSU Breakout Board
$31.00
ZigBee 4.5 CC2652P USB Stick with Ser2Net Support
$25.00
ESP8266 ESP-01 USB Programmer / Flasher / Debugger
$7.99
CO2, Temperature, Humidity, Pressure - WIFI Sensor
$69.00
About
Coder, Webdesigner, Software and Mechatronics Engineer.
I speak German, English, Russian and Ukrainian, also I understand Polish language very well.
Shipping Policies
No country selected, please select your country to see shipping options.
Reviews
Lena | Nov. 15, 2021
Good product, amazing support!
For Mini WS2812/SK6812 Matrix WLED FastLED Controller
Paul | Nov. 4, 2021
Works well for me
For WIFI Low Power Fishtank Temperature logger s4
Mogens | Sept. 14, 2021
Works most of the time
For WIFI Low Power Fishtank Temperature logger s4
Gianluca | March 13, 2021
Perfect and very tiny
For Mini WS2812/SK6812 Matrix WLED FastLED Controller
Thomas | Jan. 25, 2021
Worked only after re-flashing with Tasmota
For WIFI IoT Relay for your Smarthome with Tasmota FW
I was unable to get the item to function properly.
The web interface was not working and the manual button did not engage the relay.
On power-up the unit would simply toggle the relay continuously every few seconds.
After about an hour of tinkering I reflashed the firmware.
The unit performed exactly as expected after it had been reflashed.
Response from TeHyBug | Jan. 25, 2021
thanks for your review.
I have left a link to the first start pdf with my shipping message and It should be visible in your order details.
Tasmota has a factory reset feature, by holding the (mode) button for 40 seconds it will reset everything, there are also other modes connected to the button, but this is well documented on the tasmota docs.
Kind Regards,
Oleg