Tindie
We are seeing many shipping delays, especially for international orders. Please check individual product pages for details. More info on COVID-19 and Shipping
TeHyBug
Overall Rating:
All Reviews
Mogens | Sept. 14, 2021
Works most of the time
For WIFI Low Power Fishtank Temperature logger s4
Nice and compact. 2 options for power supply. Documentation appears to be sensibel, but on my equipment setup was quirky and inconsistent.
Thomas | Jan. 25, 2021
Worked only after re-flashing with Tasmota
For WIFI IoT Relay for your Smarthome with Tasmota FW
The unit is well built but came with no documentation and no links to any on tindie or on the creators website.
I was unable to get the item to function properly.
The web interface was not working and the manual button did not engage the relay.
On power-up the unit would simply toggle the relay continuously every few seconds.
After about an hour of tinkering I reflashed the firmware.
The unit performed exactly as expected after it had been reflashed.
I was unable to get the item to function properly.
The web interface was not working and the manual button did not engage the relay.
On power-up the unit would simply toggle the relay continuously every few seconds.
After about an hour of tinkering I reflashed the firmware.
The unit performed exactly as expected after it had been reflashed.
Response from TeHyBug | Jan. 25, 2021
Hi Thomas,
thanks for your review.
I have left a link to the first start pdf with my shipping message and It should be visible in your order details.
Tasmota has a factory reset feature, by holding the (mode) button for 40 seconds it will reset everything, there are also other modes connected to the button, but this is well documented on the tasmota docs.
Kind Regards,
Oleg
thanks for your review.
I have left a link to the first start pdf with my shipping message and It should be visible in your order details.
Tasmota has a factory reset feature, by holding the (mode) button for 40 seconds it will reset everything, there are also other modes connected to the button, but this is well documented on the tasmota docs.
Kind Regards,
Oleg
Greg | Feb. 8, 2020
Excellent turn-key sensor
For TeHyBug Mini, WIFI Weatherstation and data logger
I'm going to be using the TeHyBug to monitor the the workspace under our acquarium, to detect any leaks (for a couple reasons, a simple water flood detector won't work; humidity sensing is best). So I hooked it up with some off-the-shelf packages to provide everything needed.
Details: https://prng.blogspot.com/2020/02/howto-environment-sensors-in-home.html
Details: https://prng.blogspot.com/2020/02/howto-environment-sensors-in-home.html