TeHyBug

453 orders since Mar 03, 2018

Truskavets, Lviv Region, Ukraine

Ships from Germany.

View Store

If you have any questions or need further information, please feel free to contact me.

Overall Rating:

Review Breakdown

Average Ratings

Product: (4.85)

Documentation: (3.96)

Shipping: (4.62)

Communication: (4.69)

All Reviews

Bruno | May 27, 2025

Great Product

For M5StickC PLUS2 NRF24/CC1101 Dev Board

Everything worked as advertised, product arrived quickly and in good conditions easy and simple to use.

Kd | May 19, 2025

The item is Amazing and works perfectly

For M5StickC PLUS2 NRF24/CC1101 Dev Board

I ordered on the 5th, and it arrived today on the 19th. Pretty lengthy but understandable as it’s coming with no tracking, you will be notified when the item has been shipped just to put your mind to ease. The seller is responsive to questions and quick with the feedback. Overall great. Maybe try negotiating to pay more for speedy shipping if you need it sooner but yeah overall happy and will order again

Michael | April 15, 2025

Best Dev Board for the M5stickCplus2.

For M5StickC PLUS2 NRF24/CC1101 Dev Board

The dev board is very solid. Quality is great. Plug and play. Very easy to setup and go. Works with Bruce firmware as of writing this. Fantastic seller. They answered all my questions and shipping wasnt too bad either. I recommend getting one of these if you have the M5stickCplus2. It will make your life easier.

I have a review on my Youtube Channel.

https://youtu.be/V4Rk8DRJW1Q

Juergen | Feb. 2, 2025

Very good products, excellent support!

For TeHyBug Mini2 Temperature/Humi/Barometer sensor

Ordered the product (4 pcs), packing and shipping was as expected, fairly good documentation on GitHub, installation worked as documented, mainly because I am relatively new to IoT, microcontrollers, Home Assistant, I needed some assistance which was provided within a few hours. The product itself is of good quality (board, 3D printed housing), works as expected. Can be recommended!

Vladimir | Oct. 29, 2024

Perfect

For Flipper Zero NRF24/CC1101 and ESP8266 Dev Board

Excellent quality board, exactly as described. Very fast shipping. Great seller, highly recommended! Thank you!

John | June 17, 2024

Great Buy

For Flipper Zero NRF24/CC1101 and ESP8266 Dev Board

Perfect solder for cases, works great, great communication, and instructions are on the board itself. Great shipping and would buy from again!

Daniel | Feb. 8, 2024

Perfect for small LED installations

For Neopixel WS2812/SK6812 WLED FastLED Controller

Pre wired and ready to go, just add a esp01 or esp01s flashed with WLED. I used this in a small statue where the size was limited

Thomas | Nov. 19, 2023

Works like a charm

For TeHyBug Universal 18650 environmental data logger

Product works as expected. Communication to the developer very good. Questions were answered fast and precise.

Vladimir | Sept. 2, 2022

Controlling PC motherboard PWR

For Micro WIFI IoT Relay for Smarthome with Tasmota FW

Most of my PCs behave well and can be powered on or off via AC or via WoL, but recently I came acros a stuborn ASUS motherboard that does not want to power on to anything else but PWR shortcircuit button/signal.
Of course, I reached for Tindie in search of a solution, and here it is.
This Tasmota Relay is perfect because it is light and small and is powered by 5V/USB.
Works like a charm.
Now I can power on and shutdown my PC remotely as if I was pressing the PWR button on the case.

Lena | Nov. 15, 2021

Good product, amazing support!

For Neopixel WS2812/SK6812 WLED FastLED Controller

The product, the time to ship the item and the customer support from oleg are wonderful! Only the documentation could be better, but the nice and fast customer support fixes that problem for me too. Highly recommend!

Paul | Nov. 4, 2021

Works well for me

For WIFI Low Power Fishtank Temperature logger s4

Pretty easy to set up, I soon had it sending data to my server over MQTT. A versatile and useful sensor.

Mogens | Sept. 14, 2021

Works most of the time

For WIFI Low Power Fishtank Temperature logger s4

Nice and compact. 2 options for power supply. Documentation appears to be sensibel, but on my equipment setup was quirky and inconsistent.

Gianluca | March 13, 2021

Perfect and very tiny

For Neopixel WS2812/SK6812 WLED FastLED Controller

As you would ezepxt it works fine and makes the cabling mamagement much easier. Oleg is extremely proactive when it comes to customer support too, which is really good of course.

Thomas | Jan. 25, 2021

Worked only after re-flashing with Tasmota

For WIFI IoT Relay for your Smarthome with Tasmota FW

The unit is well built but came with no documentation and no links to any on tindie or on the creators website.
I was unable to get the item to function properly.
The web interface was not working and the manual button did not engage the relay.
On power-up the unit would simply toggle the relay continuously every few seconds.
After about an hour of tinkering I reflashed the firmware.

The unit performed exactly as expected after it had been reflashed.

Response from TeHyBug | Jan. 25, 2021

Hi Thomas,

thanks for your review.
I have left a link to the first start pdf with my shipping message and It should be visible in your order details.
Tasmota has a factory reset feature, by holding the (mode) button for 40 seconds it will reset everything, there are also other modes connected to the button, but this is well documented on the tasmota docs.

Kind Regards,
Oleg

Lars | Jan. 24, 2021

Works great

For WIFI IoT Relay for your Smarthome with Tasmota FW

Works great out of the box, easy setup, did take a few minutes to figure out how to hook it up to my home assistant installation (enable WeMo emulation and point home assistant to port 80). Documentation could be better, but overall highly recommended.

Gordon | Jan. 22, 2021

easy set up - nice unit

For TeHyBug Mini2 Temperature/Humi/Barometer sensor

Just received the S5 , well made , nice solder job . Set it up quick , the only weird thing not tehybug related , when I tried to connect to 192.168.1.1 , I got the login page for my neighbors router, thermostat . After I could connect to the tehybug all was good . Will definitely order again . fast shipping , a great value for the cost .
thanks

Mogens | Sept. 30, 2020

OK

For WIFI IoT Relay for your Smarthome with Tasmota FW

Bought this item without really needing it. I was looking for a temperature logger to be used by a friend, when I was tempted to see if this WIFI relay would work.
It works as promised, but after some correspondence with the seller. The seller is fast an concise to respond.
Documentation is to the point and could need a little more explanation for the noob.

Gerhard | June 24, 2020

eine lohnende Investition, absolut Empfehlenswert!

For TeHyBug Mini2 Temperature/Humi/Barometer sensor

Das Produkt ist in der Grundfunktion einfach in Betrieb zu nehmen, es sendet anschliessend zuverlaessig die Daten, die Dokumentation ist gut und zeigt auch Anwendungen fuer Erweiterungen auf, der Entwickler antwortet auch auf Fragen. Mit einem Solarpanel 6Volt / 5Watt und einem passenden Solar Ladegeraet arbeitet das System autonom. Ein passendes Gehaeuse, wie es ueblicherweise fuer Wetterstationen verwendet wird, fuer die Sensorplatine ist auch im Handel erhaeltlich.

Gernot | June 15, 2020

Good product

For TeHyButton Mini, WIFI Open Door Sensor

Shipping and aftersales support of the 3 units was fast and excellent; getting the product to use in no time.
Easy to use and wonderful with tehybug data server integration. Blynk notification works out of the Box.
Documentation can be improved: screenshots, use with MQTT, Blynk - not sure if I can change the firmware if I wished to - currently no need though.

Greg | Feb. 8, 2020

Excellent turn-key sensor

For TeHyBug Mini, WIFI Weatherstation and data logger

I'm going to be using the TeHyBug to monitor the the workspace under our acquarium, to detect any leaks (for a couple reasons, a simple water flood detector won't work; humidity sensing is best). So I hooked it up with some off-the-shelf packages to provide everything needed.

Details: https://prng.blogspot.com/2020/02/howto-environment-sensors-in-home.html

Gordon | Jan. 23, 2020

Great product

For WIFI Low Power Temperature and Humidity logger s2

Well built , very easy to set up ( with instructions) . Works just as described and will purchase another if needed .

Henry | Dec. 20, 2019

Great little device!

For TeHyBug Mini2 Temperature/Humi/Barometer sensor

Awesome! It works great and it works great as a plug and play MQTT broker. Instructions are provided and were quick to provide support.

Jack | Sept. 8, 2019

Great Product!

For Mini WIFI Temp/Humi and Pressure, AirQ logger s6

Newbie on this type of product, able to connect to it etc, but probably need more documentation to use it with BLYNK,
Have some more uses for additional units if I can make this one work OK:-)

Response from TeHyBug | Sept. 8, 2019

Hello Jack,
thanks for your honest review,
I'm continuously working on improving my devices and every feedback helps me.
If you plan to use blynk directly, it has documentation which you can get at the blynk site (Blynk HTTP RESTful API), TeHyBug is not affiliated with blynk.
There is a blynk data forwarding at the TeHyBug cloud, if you need help in setting it up, please let me know.
I have also developed a PHP script for sending TeHyBug data to blynk with notifications, the script is available at the TeHyBug GitHub repo.
Thanks & Regards,
Oleg

James | Sept. 16, 2018

Tehybug S3

For WIFI Low Power Temperature and Pressure logger s3

Nice compact temperature & pressure monitors. I intend to have one in my cottage and the other in a protected area in the garage to monitor temps this winter.

Frieda | June 7, 2018

Awesome Weather Tracker

For TeHyBug Mini2 Temperature/Humi/Barometer sensor

My TeHyBug arrived fast and secure. It is already ready to use as the components are already soldered by gumslone. The quality of the TeHyBug and the support from gumslone are fabulous. It is a must-buy on Tindie. Thank you so much for your awesomeness!

Frank | April 25, 2018

Works great. Accurate logging

For WIFI Low Power Temperature and Humidity logger s1

Shipping was slow. The hold up was USPS in New york. But that's just international shipping.

Setup is a breeze. You can choose update option, how often to update and where to pist. Seller provides a default cloud based log and graphic output, or roll your own.

Keep a couple of 9 volt batteries around. It comes with a 9 volt snap on, that's attached with a screw terminal so that looks great for whatever you need to power it with.

The seller was quick to answer a couple of questions i had