TeHyBug Mini is probably the most advanced and featured environmental data logger. It serves the data via HTTP, MQTT, Webserver.Designed by TeHyBug in Germany
💚 Please check the TeHyBug Universal 18650 environmental data logger which has more features and is much better for battery operations https://www.tindie.com/products/25268/ 💚 What's the difference?…Read More…
💚 Please check the TeHyBug Universal 18650 environmental data logger which has more features and is much better for battery operations https://www.tindie.com/products/25268/ 💚
TeHyBug Mini is a minimalistic design of the original TeHyBug and has similar features, it has a half-height of the original TeHyBug. Currently, only two sensor types are supported by AM2320 and DS18b20. TeHyBug Mini is thicker than the original TeHyBug because the sensor is soldered to the back of the board, the thickness with a sensor is about 20mm, the width is also 20mm, the height is 34mm.
It uses a high precision AM2320 or DHT22 Temperature and Humidity sensor like TeHyBug s1:
a temperature sensor like TeHyBug s4
A stainless steel packaged waterproof DS18b20 temperature probe/sensor:
a high precision Temperature, Humidity and Barometric Air Pressure sensor like TeHyBug s5:
a Temperature and Barometric Air Pressure sensor:
a high precision Air Quality, Temperature, Humidity and Barometric Air Pressure sensor like TeHyBug s6:
Please note this sensor, like all VOC/gas sensors, has variability and to get precise measurements you will want to calibrate it against known sources! Please run this sensor for 48 hours when you first receive it to "burn it in". After that period of time, the sensor should deliver usable data for air quality.
TeHyBug (Temperature Humidity Spy Bug) the is ultimate low power environmental data spy-bug for your home. It logs environmental data periodically and sends it to the TeHyBug-Server, your own web server, or MQTT broker like a Raspberry Pi, where you can view the data in a nice daily/hourly graph. Measure the environmental data in your private server room, basement, storeroom, library, greenhouse, etc.
Create your own weather station. Put it at any place where your wifi network is available. The battery lasts for several months! In our testing environment, the TeHy-Bug with the DHT22 sensor is collecting data for more than a half year. It uses a single 3,7 Volt 18650 LiPo-Cell (depends on sending data frequency and battery type).
Before going live with environmental data measurement, you'll have to connect your TeHyBug with a browser to set up an HTTP URL of the data web server and provide your wifi network credentials for internet connection.
The module requires a 3.4 to 11 Volt input voltage. It also requires a connection to a wifi network to send the sensor data.
The device has a preinstalled code. In a setup mode, it acts as a wifi station, you'll have to connect your computer to a wifi network TeHyBug_xxxxx and open in your browser the URL: http://192.168.1.1/ a configuration web page will open, where you'll have to provide your wifi credentials so that your TeHyBug can connect to the internet, you will have two choices:
Configuration demo video: https://youtu.be/qpJ7f3i-ft8
Configuration main page:
Configuration default mode for a tehybug.com data server:
Configuration HTTP custom mode for your custom data server:
Configuration MQTT custom mode for your custom MQTT broker:
If you'd like to set up your own data server, you can use simple PHP data logging code example from here: https://github.com/gumslone/tehybug
How to improve TeHyBug's battery life and increase its battery operation time?
The battery life depends on the data frequency you set for your TeHyBug. The TeHyBug consumes most of the power during the data measurement and wifi connection, once the wifi connection is established and the sensor data is sent to the data server, the ESP8266 chip goes into a power-saving deep-sleep mode. In battery-powered mode, the data frequency should be set to 30 minutes or more. It also depends on the battery type that you use, by default you receive a TeHyBug with a 9v battery connector, so you can easily use it with a 9v battery. The 9v batteries have a low Ampere-hour capacity so it's recommended to keep the data-frequency high. TeHyBug supports different batteries from 3.4V to a maximum of 11V, so you can use other batteries with it too. In case, you want it to measure the data very often (i.e. every 5 minutes or less), it is recommended to use a power supply, for example, a USB power supply for your TeHyBug.
If you have any further questions please feel free to contact me
Please check my store for other IoT and smart home devices.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when TeHyBug Mini, WIFI Weatherstation and data logger can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
Greg | Feb. 8, 2020
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!