An universal weather station with environmental data logger that supports multiple different detachable sensorsDesigned by TeHyBug in Ukraine
⚠️If you don't know which sensor works best for you or you need a custom setup, feel free to contact me for more information.⚠️ What is it? A universal sensor board with a 18650 Battery holder which …Read More…
⚠️If you don't know which sensor works best for you or you need a custom setup, feel free to contact me for more information.⚠️
A universal sensor board with a 18650 Battery holder which supports different detachable i2c/one-wire sensors that can be connected with a 4-pin 3.5mm audio connector. There is also a tight-fit pin-header connector for common i2c sensors/OLED display (VCC->GND->SCL->SDA) where you can connect the sensor board without soldering.
There are also two soldering pads on the board back to connect a solar panel to the board which will charge the battery (requires battery holder desoldering).
The board has 3 sensor ports:
TeHyBug (Temperature Humidity Bug) is an ultimate low power environmental data spy-bug for your home. It logs environmental data periodically and sends it to the TeHyBug-Server, your own web server, or an MQTT broker like a Raspberry Pi, where you can view the data in a nice daily/hourly graph. Measure the environmental data in your private server room, basement, storeroom, library, etc.
Depending on the sensor type that you connect, current firmware supports:
It can measure all the data like other "Classic" TeHyBugs in my store.
All sensors (excerpt DS18b20) come with a 25cm long 4PIN Audio Jack cable. It is also possible to connect a detachable pin-header sensor to the board, please select the sensor on board option. The waterproof DS18b20 has a 1m cable.
There is a 18650 Battery charging circuit. Easy to configure everything through a web interface. You can also add a 6V solar panel which will charge the battery at a daytime
It provided multiple data serving modes:
Low power, (depends on settings), it serves data periodically, and the module sleeps in between to reduce the power consumption to the minimum.
You don't need a Sensor Hub, just a 2.4G WiFi Router, also you are free to use your own custom MQTT Brocker or data server. The battery lasts more than half a year (depends on data serving frequency and sensor type) and can be easily recharged since a lipo charging circuit is on board.
Regulatory Notice. THIS KIT IS DESIGNED TO ALLOW PRODUCT DEVELOPERS TO EVALUATE ELECTRONIC COMPONENTS, CIRCUITRY, OR SOFTWARE ASSOCIATED WITH THE KIT TO DETERMINE WHETHER TO INCORPORATE SUCH ITEMS IN A FINISHED PRODUCT AND SOFTWARE DEVELOPERS TO WRITE SOFTWARE APPLICATIONS FOR USE WITH THE END PRODUCT. THIS KIT IS NOT A FINISHED PRODUCT AND WHEN ASSEMBLED MAY NOT BE RESOLD OR OTHERWISE MARKETED UNLESS ALL REQUIRED FCC EQUIPMENT AUTHORIZATIONS ARE FIRST OBTAINED. OPERATION IS SUBJECT TO THE CONDITION THAT THIS PRODUCT NOT CAUSE HARMFUL INTERFERENCE TO LICENSED RADIO STATIONS AND THAT THIS PRODUCT ACCEPT HARMFUL INTERFERENCE.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when TeHyBug Universal 18650 environmental data logger can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
Thomas | Nov. 19, 2023
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!