A very small simple to solder +/- 12V and GND powersupply. All you need to add is a AC-AC Wallwart adapterDesigned by Sourcery Studios, Ships from Sweden
PLEASE OBSERVE THAT IF YOU USE THE RED HEADER PINS FOR ORIENTING THE RIBBON CABLE, THEN RED MEANS -12V ON THOSE CABLES! SO THE RED HEADER PIN ON MINUS 12V IF ANYWHERE! What is it? A super simple Po...Read More…
PLEASE OBSERVE THAT IF YOU USE THE RED HEADER PINS FOR ORIENTING THE RIBBON CABLE, THEN RED MEANS -12V ON THOSE CABLES! SO THE RED HEADER PIN ON MINUS 12V IF ANYWHERE!
A super simple Power supply to build to get your modular or synth project up and running quick and easy. Comes with all the components to build the power supply. EXCEPT an AC-AC converter to convert from your countrys wall power to 12VAC. This is also a good soldering excercise if you are new to soldering. Look at the video first to see how easy it is and that you are capable of solder this together.
Power is crucial for any DIY build, but sooo boring to make. This simple build takes care of the problem quick, easy and cheap. It is not the best power supply you will ever have, but I have used this in my modular build and it has worked great.
Its small it is cheap it is easy.
Here is a link to the Schematics: https://www.dropbox.com/s/rcj0y2tqixwzs0l/Schematic_-12V-Power-Supply_-12-Volt-Power-Supply_20181017074558.pdf?dl=0
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!