Tindie

It quickly arrived very well packaged. The whole kit was very easy to assemble and worked flawlessly. Obviously, you have to provide the oven but also the relay (which most of us, DIYers already have in stock). Also, as each oven if different, you'll have to find how to open and modify your own oven. This being said, if you are reflowing PCBs, chances are this is not rocket science for you! Personally, everything was up and running in less than an hour.

Mike | May 29, 2019

Very professional product

This is one professional, easy to use and wire up piece of hardware. I whole heatedly can recommend this to anyone needing a reflow controller.

Iulian | May 14, 2019

Super product !

For SAMD21G Mangler

I highly recommend , it does his job ! The pcb and 3d printed accessories are exactly what you need !

Kerry | April 9, 2019

Great little unit, works a treat!!

What a great little unit, fired up first go.

used the OVEN the creator used...does a great job, and tracks profile nicely.

I used the last profile that was programmed in and 187 deg leaded paste....for my oven with no insulation it worked very good.

just because others did, I ordered some heat reflector tape for window internal walls, this will only make it quicker to heat / cool...

not really needed as it re-flows well already...

I did ask a lot of questions, that's me I guess...creator was very helpful with his time and info....thx again for that Seon!!

really happy with this unit and would recommend to others.

thx again!!

Ktronik

Mark | March 22, 2019

Excellently designed product!

Reflow Master is a brilliant solution for creators to make their own DIY reflow toaster oven. Very well designed and backed up with professional build quality. I highly recommend this product and other products from this seller.

Brian | Dec. 20, 2018

Great fun!

My 60+ year old eyes managed (just) to deal with the very small SMD components.
Great outcome and ready to impress at Christmas. Highly recommended.

Kaye | Dec. 17, 2018

Great little kit.

For TinyDev tiny Tiny85 RGB LED Driver/Dev Board

Really nice to be able to support a local seller. Love your youtube channel. This kit is great to practice some SMD soldering. Nicely packaged and put together. Very well documented. Look forward to seeing what you unexpectedly make next.

Steve | Nov. 1, 2018

Wonderful purchase experience

Shipped to USA quickly. I bought two boards, assembled -- price for assembled is minuscule! Very clean build. The developer is crazy good with communication. Documentation consists of a small card, tho -- no "full up" datasheet, so some knowledge is assumed. Buy 'em up!

Amine | Oct. 16, 2018

Love it!

Just Received two kits today, Seon shipped them next day and shipping time was as expected, 2 weeks from Australia to Canada . Thank you Seon for including a solder paste stencil, the boards are clean and well made. I just have to put it together, can't wait!

Michael | Oct. 10, 2018

Fantastic item!

For Segliment Display

I’m so pleased with this Segliment display, can’t wait to assemble it! Fast shipping and great service, hope to do business again!

Tim | Sept. 23, 2018

My toaster oven just became part of my Maker kit!!

The Reflow Master arrived straight away and has taken me very little time to add on to the toaster oven, I had great results from my first attempt. Before I bought the Reflow Master I'd never done any surface mount and have always persisted with hand soldering or avoiding it all together. After fitting the controller and doing one empty trial run I decided to put in a brand new ciruit board with a mix of parts like a Hirose Micro SD slot to see how well I could get it reflow, perfect on the first try with no rework required. Also, the Unexpected Maker himself has been super responsive to any questions I've had.

Kenneth | Sept. 15, 2018

Love it!

For TinyDev tiny Tiny85 RGB LED Driver/Dev Board

If you are looking for something in between the calm "1206" waters of the "I Can Surface Mount Solder" kit and the "0201" insanity of the SMD Challenge, this is it. I think "0603" is the perfect surface mount size for makers because they can be done by hand without magnification or special soldering tips.

The kit parts are clearly marked, and the kit comes with a "locating" diagram to help out. An extra LED or two would be nice as I lost one and burned one. I love the blink patterns and PCB shape. The perfect eye-catching addition to my Maker Faire vest, joining PartFusion's "I Can Solder" badge and tomm_archer's "Francis X. Clampazzo" badge.

David | Sept. 10, 2018

TinyDev board

The parts arrived in good order, well packaged with all necessary documentation. I would highly recommend this vendor, who is also very responsive to enquiries via Facebook IM.

Martin | Sept. 10, 2018

Awesome Surface Mount Devices (SMD) challenge kit

Shipping from Australia to Canada in a flat envelope took 18 calendar days.

Doing the challenge took me 58 minutes from opening the package to reading the instructions, compare the parts I got with the one in the instructions, layout everything on the silicone mat, solder every 35 components (82 solder to make), brush the flux out and clean the solder with alcohol. The badge did not work the first time I've put the CR2032 battery in (not included by the way) but figured out that pressing onto the battery holder was putting power in, so I had to desolder it and apply some solder on the negative pad of the battery on the PCB to help it make contact with the battery. This is included in the 58 minutes chrono.

I have to admit that over all the SAO kits (Shitty Add Ons) and SMD challenge kits I have done lately, this one here had the clearest instructions I've seen so far. Printed in colors, and all the parts were numbered.

Unfortunately, there's not a single extra part included. Don't kick out an LED by squeezing too hard on your tweezer because you are gonna have to search the floor for it, trust me, I know what I'm talking about. ;) (Stopped the chrono for that.)

I have not yet played with the "Hackable Header" pads on the board to reprogram the Attiny85 chip.

Jason | Aug. 30, 2018

I finally have a Reflow Oven

I finally have a reflow oven. I have been creating and soldering my own boards for the last couple of years.
I have been moving over to SMD components and was doing everything by hand.
Found the Unexpected Maker's channel and started watching videos. Up comes the Reflow Master. Finally a reflow oven solution that was in my price range.
Received the board and as I am located in Australia purchased the same cheap oven the maker is using. Installed the reflow master in less than 30 minutes and did a test. Results were perfect!! I could not believe how easy it was to get this thing going.
Since then I have soldered over 40 boards, with around 20 components each, and have only had to rework a couple (Due to adding too much paste ;) )
Now the thought of manually soldering boards gives me shivers.

The maker has been great in offering support and has been prompt in answering any questions I have had. Even the stupid ones.
I would highly recommend anyone purchase this if they are looking to get some professional results with their soldering work.

Hermen | Aug. 29, 2018

Recommended!

I just wanted to have this Reflow Master because it looks very promising although it's still work in progress. So it will be even better over time.
Shipping was surprisingly, the packing nice.
Seon's support is excellent!

Timothy | Aug. 26, 2018

Exactly as described - nothing "unexpected" here!

For TinyDev tiny Tiny85 RGB LED Driver/Dev Board

I was fascinated when I first started this project in how you can build things and yet still have a unique design to them. Since this was something I was interested in I had to have it and I am looking very forward to building it!

Ron | Aug. 14, 2018

Shipping was fast and the board worked flawlessly

Shipping was very fast, it isn't usually that fast here in israel. The board itself works very well and is suitable for any project requiring small electronics for controling leds. The package included the board if self with an additional pcb
and some freebies. Over all im very satisfied with my purchase and i will buy again!

Jonathan | July 22, 2018

Great display!!

These displays are awsome. They are very bright and easy to use.
The first time I build one I made the mistake of using the wrong reflow temperature.
While I didn't ask for it, Seon did sent me a new kit. Which is awsome.
He is a very generous person.

Everyone can use a display like this in their projects, so support Seon by buying one!

Joel | May 28, 2018

Awesome little LED displays

These displays blew me away with the quality and ease of use. The example code for these made it a breeze to test them out and get them working. The brightness range is also impressive. These are awesome displays and highly recommend them!

David | May 23, 2018

Buy one and you will want two

Lovely design, much better than throwing some Neopixel strips together.

Pretty difficult to solder by hand but if you are game, you can do it. That said, if you have reflow/hot air equipment then it will be a walk in the park.

Super easy to use with the code provided and modify it; but you can use your own code if you prefer.

The one I bought was the Black LED kit, it came with all the LEDs and I really liked the little 3535 package for the decimal point.

Well worth grabbing.

Stephen | May 16, 2018

What a fantastic kit to buy, great support, great maker! A+