Le paquet a été envoyé très rapidement (10 jours entre la commande et la réception), dans un emballage très soigné.
Aucune documentation n'est présente cependant, il faut aller voir sur le projet github.

Un mosfet sur le PCB a pris feu après avoir débranché l'appareil du secteur, endommageant gravement la plaquette, l'écran, et rendant l'appareil inutilisable.
Le conseil donné : ponter 2 points (brulés dans l'affaire et donc non récupérables) ou acheter un mosfet pour le remplacer également impossible car les points ont brûlé la plaquette).
Heureusement, j'ai tout le nécessaire pour souder à la maison.

J'attends de voir comment évolue la prise en charge...

Karim | May 17, 2019

REQUIRES EXTERNAL ANTENNA OR MINE IS BROKEN

For DSTIKE Deauther Watch V1

Nothing I can say but I need to reach 100 characters so look out world. Here I come! I am still typing because here I come!

Rick | Oct. 30, 2017

Neat Idea... design and assembly need a little more love.

For WiFi Deauther OLED V1.5(Pre-flashed)-White

Initially, the board looked great... more on that in a bit. Packaging was crushed, but was big enough to prevent damage to the contents. Shipping to the East Coast was a little over three-weeks.

Disappointing that there is no reverse polarity protection (ask me how I found this out). To be fair, there is a warning on the product page. But seriously, this can and should be properly handled with a few pennies-worth of components.

Power supply runs extremely hot to the touch at peak output; release notes indicate that this was improved? I have mixed feelings about using this in unattended solutions.

Device was restarting randomly while powered via laptop USB; connector fell-off the PCB after a light jiggle. Closer examination shows the traces were soldered but the body of the USB PCB connector was not. All these problems were present in both the WiFi Deauther OLED V1.5 and WiFi Packet Monitor.

Harsha Vardhan | Oct. 27, 2017

Good product, but needs improvements

For WiFi Deauther OLED V1.5(Pre-flashed)-White

Overall, it is a good product, and what i was looking for. I was looking for an ESP8266 based product with integrated display, and LiPo battery management. It was needed for a product, and hence the WiFi Deauther functionality was not useful for me.

Improvements
1) Mounting holes, and their strength
2) LEDs could have been bigger. I had hard time in desoldering the SMD and integrate an regular LED (since i used a box)
3) No reverse polarity protection for battery
4) The display can't be moved up, as the inductor height is more (especially, if you are using a top plate, display won't flush)

I bought 6 units, and 4 of them are working fine. One of the display is totally not working (ever since I received) and the other one's glass edge got broken, since it is very near to mounting hole.

Klaus | Sept. 2, 2017

Watch out setting correct settings for flashing

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

Had some trouble to flash it, board did not boot.
Got hint on github from another user, he pointed me to right settings in Arduino IDE.
Use these settings:

Board: Generic ESP8266
Flash Mode: DIO
Flash Frequency: 40Mhz
CPU Frequency : 80Mhz
flash size: 1M (256K SPIFFS <<< not sure about this one but it works
Reset Method: nodemcu
Upload speed: 921600

Gwendolyn | Nov. 18, 2016

Flasher program giving Trojan:Win32/Spursint.A!cl warning!

For D-duino V2(Arduino&NodeMCU&ESP8266&0.96OLED)

I just got this lovely board a few days ago, and started to go through the FAQ. I downloaded the ESPFlasher on your site as well as the driver, but my Microsoft Security Essentials flagged the Flasher as having a Trojan infection. Trojan:Win32/Spursint.A!cl is what it came up with!

Category: Trojan

Description: This program is dangerous and executes commands from an attacker.

Recommended action: Remove this software immediately.

Items:
containerfile:c:\ProgramData\Microsoft\Microsoft Antimalware\Scans\FilesStash\2FC44567-3579-5024-D3BB-44FF37A98E6A_1d242c12aeb0ae2
file:c:\ProgramData\Microsoft\Microsoft Antimalware\LocalCopy\{D551D888-91A9-44B4-BCC1-AA3384A4E18A}-ESP8266Flasher.rar
file:c:\ProgramData\Microsoft\Microsoft Antimalware\Scans\FilesStash\2FC44567-3579-5024-D3BB-44FF37A98E6A_1d242c12aeb0ae2->(MPLC)
file:C:\Obfuscated_Path\Downloads\ESP8266Flasher.rar
webfile:c:\ProgramData\Microsoft\Microsoft Antimalware\LocalCopy\{D551D888-91A9-44B4-BCC1-AA3384A4E18A}-ESP8266Flasher.rar|chrome.exe
webfile:c:\ProgramData\Microsoft\Microsoft Antimalware\Scans\FilesStash\2FC44567-3579-5024-D3BB-44FF37A98E6A_1d242c12aeb0ae2|http://dong-sen.com/wp-content/uploads/2016/02/ESP8266Flasher.rar|chrome.exe
webfile:C:\Obfuscated_Path\Downloads\ESP8266Flasher.rar|http://dong-sen.com/wp-content/uploads/2016/02/ESP8266Flasher.rar|chrome.exe

I'll try getting the Flasher from Espressif and see if that's ok. But you should be aware that your copy may have been compromised...or there is a false positive you need to be aware of and mark it accordingly!

Please contact me if you need more information, and if anyone else knows something about this, please let me know.

Response from Travis Lin | Nov. 18, 2016

You can go to http://espressif.com/en/products/hardware/esp8266ex/resources to download the newest flash tool.
I tested the file on my site. It is OK and safe. I think it is the Microsoft Essentials' problem.
I have already added the link to download the newest flash tool.
Thank you for your information!

Tindie

Travis Lin

Overall Rating:

Review Breakdown

Average Ratings