Tindie
8-Bit-Force
Overall Rating:
All Reviews
Jay | May 14, 2021
Another fun kit
For RetroShield 6502 for Arduino Mega
This kit was very quick and easy to build. It's been fun to run the 6502 from my Teensy. It's very quick to load new 6502 firmware into the teensy instead of pulling out an EPROM, burning it and replacing it as I've done many times in the past. Thanks!
Malcolm | May 11, 2021
Z80 and MBasic on an Arduino Mega!
For RetroShield Z80 for Arduino Mega
Very high quality kit that worked immediately and allowed me to rediscover Microsoft Basic. Thoroughly recommend for anyone who has Z80 in their history!
Pierre | March 3, 2021
Full speed RetroShields
For Teensy Adapter for RetroShield
This board allows the old processors, 6809 for instance, to run a bit above 1MHz with a Teensy 3.6 where the Arduino Mega is ten times slower.
This speed allowed me to add many devices, emulated by the software, like a 7 segments display and a keyboard, and also an interface to the SD Card. They are seen as memory addresses by the RetroShield processor. The power of the Teensy 3.6 allows to stay above 1MHz most of the time.
I tried to adapt the software to the new Teensy 4.1, but its I/O registers are a bit different and force some modifications in the software. I must add that the software version for the Arduino Mega cannot run on the Teensy. You will have to take the right version, on https://gitlab.com/8bitforce/retroshield-teensy
The Teensy Adapter board is very easy to build. The PCB and components are of the best quality. All the documentation is perfect, and the schematics are not ugly at all, despite what the designer, Erturk Kocalar wrote :-)
I uploaded a small video on YouTube to demonstrate the Adapter and 6809 RetroShield : https://www.youtube.com/watch?v=1ehCcJTsoew
This speed allowed me to add many devices, emulated by the software, like a 7 segments display and a keyboard, and also an interface to the SD Card. They are seen as memory addresses by the RetroShield processor. The power of the Teensy 3.6 allows to stay above 1MHz most of the time.
I tried to adapt the software to the new Teensy 4.1, but its I/O registers are a bit different and force some modifications in the software. I must add that the software version for the Arduino Mega cannot run on the Teensy. You will have to take the right version, on https://gitlab.com/8bitforce/retroshield-teensy
The Teensy Adapter board is very easy to build. The PCB and components are of the best quality. All the documentation is perfect, and the schematics are not ugly at all, despite what the designer, Erturk Kocalar wrote :-)
I uploaded a small video on YouTube to demonstrate the Adapter and 6809 RetroShield : https://www.youtube.com/watch?v=1ehCcJTsoew
Pierre | March 3, 2021
Super nice way to run a 6809
For RetroShield 6809 for Arduino Mega
When I was young I tried to build a simple computer based on a 6809, with very few circuits around, ram, rom and minimal address decoding. This was a failure because I had no tools to program the eeprom at home, and no enough experience.
This Retroshield is a very smart and easy way to make a 6809 run, at nearly the nominal speed with a Teensy 3.6. Ertuk Kocalar has designed a general bus to connect most of the old 8 bits processors: address, data and control lines are unified so that this only a question of software in the Arduino to emulate the ram, rom and devices around the processor. All the signals (E, R/W,...) are managed by the Arduino, so that the 6809 thinks it is in a real computer.
All the sources are available on GitHub and everything is documented, commented, and easy enough to understand... provided you know what is a processor. So you can use the software provided (simon6809: an advanced monitor), or develop your own. You simply have to assemble a program, transform it into a C array initializer (with xxd -i) so that it is visible as preinitialized ram or rom from the 6809. I added a 7 segments displays and keyboard card, and my own simple monitor, to resemble to the KIM-1 computer. This is what I wanted to do when I was young and it now works super nicely.
I slightly modified the connection between the Arduino and the Retroshield, by welding the connector above and making a male/female connector pcb. This allow to have both cards at the same level, instead of the Retroshield above the Arduino.
About the realization, all the PCB are top quality. Everything is included (pcb, processor, support, connector, led) and very well protected in the shipping. The 6809 is a 68B09E, the fastest and most advanced version of the 6809. I had no issue at all to make it run.
So I strongly recommend these boards if you want to learn machine and assembly languages. Those old processors are the most easy way to understand the concepts because they are simple: few registers, strong addressing modes, simple opcodes, all numbers are small and understandable compared to 32 or 64 bits of the modern processors.
I uploaded a small video on YouTube : https://www.youtube.com/watch?v=1ehCcJTsoew Sorry, I don't speak, because I am not good enough in English... (French native speaker).
This Retroshield is a very smart and easy way to make a 6809 run, at nearly the nominal speed with a Teensy 3.6. Ertuk Kocalar has designed a general bus to connect most of the old 8 bits processors: address, data and control lines are unified so that this only a question of software in the Arduino to emulate the ram, rom and devices around the processor. All the signals (E, R/W,...) are managed by the Arduino, so that the 6809 thinks it is in a real computer.
All the sources are available on GitHub and everything is documented, commented, and easy enough to understand... provided you know what is a processor. So you can use the software provided (simon6809: an advanced monitor), or develop your own. You simply have to assemble a program, transform it into a C array initializer (with xxd -i) so that it is visible as preinitialized ram or rom from the 6809. I added a 7 segments displays and keyboard card, and my own simple monitor, to resemble to the KIM-1 computer. This is what I wanted to do when I was young and it now works super nicely.
I slightly modified the connection between the Arduino and the Retroshield, by welding the connector above and making a male/female connector pcb. This allow to have both cards at the same level, instead of the Retroshield above the Arduino.
About the realization, all the PCB are top quality. Everything is included (pcb, processor, support, connector, led) and very well protected in the shipping. The 6809 is a 68B09E, the fastest and most advanced version of the 6809. I had no issue at all to make it run.
So I strongly recommend these boards if you want to learn machine and assembly languages. Those old processors are the most easy way to understand the concepts because they are simple: few registers, strong addressing modes, simple opcodes, all numbers are small and understandable compared to 32 or 64 bits of the modern processors.
I uploaded a small video on YouTube : https://www.youtube.com/watch?v=1ehCcJTsoew Sorry, I don't speak, because I am not good enough in English... (French native speaker).
Paul | Dec. 25, 2020
Awesome board
For RetroShield 4004 for Arduino Mega
This is an amazing board allowing you to run and program the first ever microprocesssor. I've always wanted to build a board for the 4004 but it's difficult and not something you want to mess up. Using an arduino to emmulate hardware is a very cool idea. My board arrived promptly and worked out of the box once I'd got an arduino mega and 4004. Thanks again Erturk for an amazing board and opening up computing history to everyone.
Jay | Aug. 7, 2020
Speed up your retro processor!
For Teensy Adapter for RetroShield
This was a great kit and easy to build. It took no time to get it up and running. My 6809 board runs so much faster with it. I also have the Z80 board that I will try soon.
Jay | Aug. 7, 2020
I get to play with the 6809 again
For RetroShield 6809 for Arduino Mega
My first computer was a Radio Shack Color Computer. It was amazing to run a dumb terminal off my computer when running OS-9. This kit was quick and easy to build and worked first time. I can't wait to play more with the 6809. With the Teensy adapter, maybe I can get OS-9 running again?
Jay | Aug. 7, 2020
Great Kit!
For RetroShield Z80 for Arduino Mega
This kit was easy to build and I was able to get it working quickly. I highly recommend if you want to play with older microprocessors. Can't wait to spend more time playing with it. I have the Teensy 3.5 adapter board so it will be fun to run code even faster!
John | June 15, 2020
Want an Apple 1?
For RetroShield 6502 for Arduino Mega
Fantastic idea - use an Arduino (or Teensy) to be the Ram, Rom, Clock and IO for a genuine 8-bit processor. This kit let me emulate an Apple 1 and play with the WOZMON and even BASIC. Nothing beats using hardware to run this retrocomputing stuff, and this is a easy way to get started. Bravo!
Rene | June 15, 2020
Great project, great support!
For RetroShield 6502 for Arduino Mega
It took almost to months for the shields to get to me - half of the time spending at the custom's office. But now they arrived. Soldering was a matter of a few minutes. The printed schematics and hints are all you need. Software is available on the Internet. I will now start exploring it.
This is a great project if you want to explore different CPU types with minimal hardware effort. I developed several CPU cards to work in an Z80 compatible BUS system and know how complicate it can be to adapt the different signals, timings, (support chips for 8080) ... So these shields come really handy if you want to start with another processor almost at once and get to know it - before making your own project.
Thanks a lot! I'll be waiting for the other shields to come. 8008, 4004 etc. sound really interesting.
BTW: Also after sales support before shipping was great!
This is a great project if you want to explore different CPU types with minimal hardware effort. I developed several CPU cards to work in an Z80 compatible BUS system and know how complicate it can be to adapt the different signals, timings, (support chips for 8080) ... So these shields come really handy if you want to start with another processor almost at once and get to know it - before making your own project.
Thanks a lot! I'll be waiting for the other shields to come. 8008, 4004 etc. sound really interesting.
BTW: Also after sales support before shipping was great!
Alessandro | May 14, 2020
Amazing
For Teensy Adapter for RetroShield
Erturk is passionate about his products and wants his Customers to succeed!
I was very excited to find out that 8-bit-Force had already designed what I needed for a 6809-based project.
The design is solid, and the application examples are extremely useful to get me up and running quickly.
In addition to the Retroshield for 6809, I also purchased the Retroshields for 6502 and for the Z80.
I was very excited to find out that 8-bit-Force had already designed what I needed for a 6809-based project.
The design is solid, and the application examples are extremely useful to get me up and running quickly.
In addition to the Retroshield for 6809, I also purchased the Retroshields for 6502 and for the Z80.
Bryan | Feb. 4, 2020
Very happy
For RetroShield 6502 for Arduino Mega
I bought the kit, the seller answered all my questions quickly and even went above any beyond to help me out. I've still got to put the kit together, but only like 4 parts. Got my mega all hooked up and ready to program. I definately recommend this seller! The parts are packaged very professionally too.
Tor | Nov. 26, 2019
Amazing daugtherboard.
For RetroShield 6502 for Arduino Mega
I bought a bare PCB w/ surface mount parts soldered, shorted R2 and removed R4 as described in the assembly instructions , added a W65C02S and a LED. The result is an amazing daughterboard for Arduino Mega. Thank you for marrying the Arduino ports with the 6502 buses! A fantastic product if you are into Arduino Programming and retro Computing.
James | Nov. 2, 2019
Very nice board, and I plan to do quite a bit with it.
For RetroShield 6809 for Arduino Mega
We had a controller for a tape controller which ran on the 6809. I got several responses from Erturk to understand how to use this and look forward to doing a lot with it. Had no problems with Tindie, or 8bitforce.
Massimiliano | Sept. 27, 2019
One of the best shield ever
For RetroShield 6502 for Arduino Mega
What can I say, it's so fun and easy and you can do everything you want for a very small price.
8bitforce the seller, is probably the kindest ever met and I can only said thank you.
A must for everyone
8bitforce the seller, is probably the kindest ever met and I can only said thank you.
A must for everyone