Your Arduino Projects Simplified!

Description:

The Arduino Nano Family Relay Shield provides both flexibility and functionality to the user, yet it is elegantly simple in design. This relay shield is flexible in that it works with the Arduino Nano Family of microcontrollers. It superior functionality come from its capability to accept a supply voltage of up to 35 volts. Making it perfect for both 12 volt and 24 volt systems. The on board power supplies can provide 5 volts at up to 1.5 amps of current draw and 3.3 volts at up to 1 amp current draw. Thus giving you plenty of juice for your projects. Adding to it's functionality is all of the microcontrollers I/O and communication pins are also broken out to male pin headers for easy access.

There are two individually controllable relays on board that isolated from the microcontroller. These relays are rated for 10 amps up to 250 volts. If you are looking to expand the number of relays to control or want to connectorize a sensor there is a 6 pin male connector on board that has 5 volts, ground, and four digital pins.

This relay shield comes fully assembled except for the female headers for the microcontroller. This is because the Nano Family exept for the Nano; has castellated holes and no components on the bottom side. Therefore it can be soldered directly to the board for a permanent solution. The female headers are included if you want the capability of easy prototyping or swapping between controllers.

The screw terminals may come in green or blue. This is based on part availability.

Features:

• M4 mounting holes
• 5V power rail
• 3.3V power rail
• Ground rail
• I/O rail
• Serial breakout pins
• I2C breakout pins
• Pads for surface mounting the Nano XX
• Up to 35 volt supply input
• 2.1mm barrel jack supply input
• Terminal block supply input
• Two isolated 10 amp power relays
• 3 position screw terminals for the relays
• 6 pin connector for expandability
• Fully Assembled - Except for the microcontroller header

Applications:

• Prototyping
• DIY Electronics
• The options are limitless as what you could do with this relay shield.

Compatible Arduino Boards:

• Nano
• Nano Every
• Nano 33 IoT
• Nano 33 BLE
• Nano 33 BLE Sense
• Nano RP2040