Breadboard plug in UNO cloneDesigned by The current stuff in Austria
An UNO clone to be directly plugged into a breadboard. Supplies +5V and +3.3V directly to the power rails of a breadboard. It is powered by a microUSB port from a powerbank, phone charger or computer…Read More…
An UNO clone to be directly plugged into a breadboard. Supplies +5V and +3.3V directly to the power rails of a breadboard. It is powered by a microUSB port from a powerbank, phone charger or computer. Additionally power can be fed or taken via spare headers for extra devices.
I made this to be able to make prototyping more easy. Building circuits on a breadboard is not comfortable with an Arduino Uno and a lot of wires are needed. This form factor board directly pluggs into a regular breadboard and feeds the power rails into it. This makes setting up circuits faster and less prone to errors.
All the Arduino pins are fed to headers where they can be directly connected to breadboarded components. It can be programmed with the Arduino IDE and behaves like a regular UNO. It has a ATMega328p microcontroller with a 16Mhz external crystal on board. Pin 13 is connected to LED4 on the board, the "blink" example therefore works out of the box. There is an ICSP header for programming with the Atmel studio without the Arduino framework or bootloader. The Arduino bootloader is preinstalled.
The output current from the 5V rail is limited by the supply, but should not go beyond 1A. On the 3V3 rail, the output current should not exceed 0.8A. The regulator (IC1) can get hot while drawing current over 3.3V. There is a power on LED to show the 5V being supplied. RX and TX pins also have LEDs to show the upload status.
Please note that the header pins are not soldered to keep shipping reasonably cheap. There is the option to have the pins soldered, which makes the board thicker than 0.5cm, therefore the surcharge, sorry about that. There is also no USB cable included, you need a micro-USB cable to connect to your computer or supply.
The "+5V" pins on JP5 are only connected to each other.
ATTENTION: The item still is a prototype. It is working as intended, but funny quirks and other things are possible. It is not certified and only suited for prototyping.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Breadboard Arduino UNO clone can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!