Compute Module carrier for Raspberry Pi CM/CM3/CM3+Designed by 8086 Consultancy in United Kingdom
The ClusterCTRL Single is a low-cost controllable USB Gadget carrier for the Raspberry Pi Compute Module. Breaking out 38 (non-power) GPIO so it's also useful where you need more than the 28 (non-pow…Read More…
The ClusterCTRL Single is a low-cost controllable USB Gadget carrier for the Raspberry Pi Compute Module. Breaking out 38 (non-power) GPIO so it's also useful where you need more than the 28 (non-power) GPIO pins accessible on the more regular 40 pin Raspberry Pi (A/B/A+/B+/Zero).
Raspberry Pi Cluster - With the ClusterCTRL software on a Raspberry Pi controller (or manual setup on Linux) the Single module (alone, with the ClusterHAT, Triple, or multiple Singles) can be controlled using the "clusterctrl" command - to power on/off, turn usbboot on/off, save defaults etc. Compute modules can be booted from the onboard eMMC (if available) or as a USB device on all models.
Can be used to write images to Compute Modules with onboard eMMC.
Once software has been uploaded to the Compute Modules onboard eMMC it can be used standalone (disable USBBOOT).
On the top of the carrier the function names (or BCM number) are printed, the bottom shows the BCM GPIO number. Numbers are shown in brackets where you need to bridge a solder jumper on the bottom of the PCB to connect the GPIO to the pin, for example BCM 21 on the UART0 header where it would conflict with the 3v3 pin on many serial adaptors.
The following pins can be accessed after soldering on standard 0.1" pitch headers, they're grouped into sections (but can be used as standard GPIO or other ALT functions).
|0||SDA0||Default pull up (disable with JMP cut)|
|1||SCL0||Default pull up (disable with JMP cut)|
|2||SDA1||Default pull up (disable with JMP cut)|
|3||SCL1||Default pull up (disable with JMP cut)|
|20||PCM_DIN||ALT0 (on SPI0)|
|21||PCM_DOUT||ALT0 (on UART0 - JMP)|
|34||(on UART1 - JMP)|
* Using BCM GPIO numbering
** Only one UART interface can be used with hardware flow control (see the documentation).
There are also a headers for.
The ClusterCTRL Single can be used standalone (you can set the default power and boot settings with the clusterctrl tool) or as a USB Device (USB OTG Gadget Serial/Network/etc).
The micro USB port cannot be used to plug in USB storage, Webcam etc. as there's a USB hub in-between.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when ClusterCTRL : Single can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
Please be aware mail to some destinations are delayed and may take up to 3 weeks in some cases.
Please ensure your address is full and correct before placing an order. I'm unable to ship to PO boxes.
Due to the 1st July 2021 EU VAT changes and limitations to the Tindie system I'm currently not shipping to the EU. If you're in the EU and want to purchase my products I'd advise searching for either global or local resellers.
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!