Add up to three compute modules to your Raspberry Pi cluster via USB Gadget EthernetDesigned by 8086 Consultancy in United Kingdom
The Cluster Triple is a step up in CPU and RAM from the Cluster HAT by using Raspberry Pi Compute Modules (CM1/CM3/CM3+). Cluster Triple Features USB Gadget Mode: Ethernet and Serial Console. Onbo...Read More…
The Cluster Triple is a step up in CPU and RAM from the Cluster HAT by using Raspberry Pi Compute Modules (CM1/CM3/CM3+).
Cluster Triple Features
The Cluster Triple is controller less, meaning all three compute modules are nodes (none of them are the controller) so it must be used with another computer (normally a Pi) to route/bridge the USB Gadget Ethernet/Serial and control the power. This is setup automatically when using the Cluster HAT controller images (based on Raspbian) on a Raspberry Pi.
The ClusterCTRL controller uses our open source firmware (building on i2c_tiny_usb which uses V-USB) running on a Microchip ATMEGA328P/PB to provide a standard I2C interface for controlling the cluster from a controller Pi.
The following are required but not provided:
For support/queries on the Cluster Triple please use the Cluster HAT forum.
We have a collection of HOWTO for the ClusterCTRL devices.
Compute modules with eMMC can be programmed directly in the Triple board without the need for additional hardware.
When using a Raspberry Pi A+/B+/2/3/3+ be aware the USB host is limited to 8 host channels so trying to use more than two Cluster Triple will not work. The Pi 4 supports up to 32 "devices".
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Cluster Triple for Raspberry Pi Compute Modules can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
Please be aware mail to some destinations are delayed and may take up to 3 weeks in some cases.
Please ensure your address is full and correct before placing an order. I'm unable to ship to PO boxes.
EU Deliveries - Items valued at under €22 will remain part of the Low Value Consignment Relief (LVCR) Scheme for items sent to the EU and are not subject to VAT or duties until 1 July 2021 (subject to further extension date to be set by the EU). Those over €22 and below €150 may be taxed at the border and may incur a customs clearance/handling fee in the receiving country (and over €150 may attract VAT, customs duties and a clearance/handling fee).
Matt | Nov. 17, 2020
Peter | Sept. 18, 2019
Răzvan-Teodor | Aug. 22, 2019
Bruce | Aug. 9, 2019
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!