PLEX is a Arduino development board with up to 32 selectable analogue inputs and digital output with 16x2 LCDDesigned by Tinkers Projects in Australia
PLEX controller PLEX is a development board using the Arduino UNO bootloader to be easily programmed by the Arduino IDE. The board has many selectable analog inputs and digital output (up to 32, no...Read More…
PLEX is a development board using the Arduino UNO bootloader to be easily programmed by the Arduino IDE. The board has many selectable analog inputs and digital output (up to 32, not including LCD interface). The board was originally designed for one project but has been used in many other projects that require a fast and simple solution. The PLEX board is the same dimensions as a 16×2 LCD and simply attaches to one.
The board has up to 32 selectable analog inputs and digital outputs not including connections to the LCD.
By decreasing the inputs and outputs from 32 to 16 will allow the SD storage to be used. This can be used for controlling, data logging or any other function.
Most Arduino devices use either 5V or 3.3V to power them and this board can deliver this power to them. The board can regulate up to 12V down to 5V and 3.3V.
This board is the same dimensions as a 16×2 LCD and attaches seamlessly to the back of it.
The Micro USB can be used to program the Atmega328 microcontroller with the Arduino IDE. It can also be used for debugging and other serial functions
By using the Arduino UNO bootloader, the controller can be programmed using the Arduino IDE. This makes it easy to program, debug and make anything.
By using the Arduino IDE and a micro USB cable, a program can be uploaded to allow the PLEX controller to do almost anything. Solder the header pins on the PLEX controller PCB/LCD, Download the PLEX controller Arduino library (Download from here) and select Arduino UNO as the board under the Tools menu. https://github.com/tinkersprojects/PLEX
These are some of the projects that use the PLEX controller
This controller allows the setting for the light to be changed and set. The light has different modes including colour fading, colour stepping, solid colour and DMX. https://tinkersprojects.com/project/dmx-light/
This ball mill was made for grinding sand and cleaning objects like rusty bolts. https://tinkersprojects.com/project/3d-printed-ball-mill/
This is a spinner that uses parts from HDDs, coating PCBs or other flat things in a somewhat even coat of liquid. It is also can be used as a magnetic stirrer by using the magnet from the HDD. The unit uses the brushless motor from HDD to spin the disk. Since the unit does not need to have a lot of torque, this motor is perfect as it can spin at high speeds (depends on the motor driver and HDD type). https://tinkersprojects.com/project/2-1-spinner-hdd/
This DMX controller to made to control stage/party lights through the DMX signal. This DMX signal is widely used for stage lighting systems at festival and clubs. https://tinkersprojects.com/project/dmx-controller/ https://tinkersprojects.com/project/dmx-controller-mk2/
This is a controller to control the pool solar heater. Timers and temperatures can be set to control the temperature of the pool. https://tinkersprojects.com/project/solar-pool-heating-controller/
This is a temperature logger to log the temperature over time. It uses a DS18B20 temperature sensor to get the temperature. The data from the sensor is logged every second and Additional sensors can be added. https://tinkersprojects.com/project/temperature-logger/
On the controller, the pressure can be set and the pump will shut off when it needs to. The pump will then start again when the pressure is 10% less than the set pressure. https://tinkersprojects.com/project/compressor-module/
On the controller, the pressure can be set and the pump will shut off when it needs to. The pump will then start again when the pressure is 10% less than the set pressure. https://tinkersprojects.com/project/plasma-cutter/
|Shipping Rate||Ships From||First item||Additional items|
Australia Post: Standard Ground Rate
Mona Vale, NSW, Australia
Ships from Australia.
Usually ships within 3 days
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!