This is a board to adapt your NiceRF SX1262 LoRa® module into a breadboard friendly format. The board will allow you to use the SX1262 with a standard 0.1” matrix breadboard or stripboards. This is a board only, the SX1262 module is not supplied.

The antenna connection can be either a simple wire, U.FL connector or an edge SMA socket. The boards are supplied with the 0.1" pins un-soldered, leaving you the option of how to assemble or use the board in a project. This board can be used with the Easy mikroBUS™ Pro Mini controller available in this shop.

The NiceRF SX1262 module is fitted with a TCXO which means that you can use LoRa® at the low bandwidths such as 7.8khz, this is far lower than 62.5khz which tends to be the limit for the SX127x style LoRa® devices. The TCXO also means that when sending FSK RTTY, as used in high altitude balloon tracking, there is less heating induced frequency drift.

Do not operate the SX1262 module without an antenna.

The SX1262 is a 3.3V supply and logic level device, do not use directly with 5V controller boards such as the Arduino UNO.

There are many examples for using this module for GPS trackers or sensors provided in an Arduino library at this link; SX12XX Library

Postage is paid in the UK. Note that your country may levy additional taxes or levies on delivery.