NOTE: this product does NOT ship to the US, only Canada.

This battery is oversized, meaning that the standard build instructions for the MintyPiPico do not apply, and you'll need to epoxy the 3D printed base into the tin, and cannot use the locking ring to secure it. But, it will give you 2X the battery life because it's 2mm thicker than the standard battery. Normal battery lasts about 1 hour, this will last about 2 hours.

1. Model:503030 053030
2. Size:H=5mm W=30mm L=30mm
3. weight:10g/pcs
4. voltage: 3.7V
5. capacity: 450mAh.
6. Charging current: standard charging, fast charging: 1.0C: 0.5C
7. Standard charging method: 0.5C CC (constant current) charge to 4.25V, then CV (constant voltage 4.2V) charge till charge current is less than or equal to 0.05C
8. The maximum charge current: 1C
9. Maximum discharge current: 1C
10. Discharge cut-off voltage: 2.75V
11. The discharge temperature: -20 degrees C~+60 degrees C
12. Charging time: 2-4hrs (standard); 2hrs (fast)
13. Protection function: over charge, over discharge, over current, short circuit protection, over temperature protection It can be recharged repeatedly Built-in protection circuit PCM for prevent over charging or over discharging.