The AT45DB081E is a 8Mb low voltage, low power Serial Flash Device. It boasts 400nA Ultra Deep Power Down currents. The device operates from 1.7V-3.6V and up to 85MHz with a Low Power Read at 15MHz. The AT45DB081E has a flexible erase architecture and can be erased by Page(256bytes), Block(2KB), Sector(64KB), or a full chip erase. The device also offers flexible Writes in which it can be programmed either by Bytes or by Page(256bytes) and has Dual-Input Byte/Page Program capability along with Sequential Program Mode capability. The AT45DB081E offers package options including 8ld SOIC(0.150” and 0.208” wide) and an 8ld UDFN(5x6x0.6mm) package of which the smMEM-AT45DB081 breakout board makes use of. The smMEM-AT45DB081 provides an easy to use, low-cost, very small breakout board for the AT45DB081. All pins are all mapped to standard 2.54mm/0.1” headers. This allows for use in a standard bread-board or to be ‘wired’ into an application. The header-header spacing is 12.7mm (500mil).

All smMEM, smSENSR, smCOM, smBAT, and smPWR products are compatible with the Sensor Maestros Wireless Sensor Prototype Platforms, smWSP and smWSP-ARD that provide Rapid prototyping for Sensor and BTLE applications. The smMEM-AT45DB081 can be plugged into ANY of the smBLOCK SPI sockets on the smWSP or smWSP-ARD platforms.

Adesto Technologies AT45DB081 Serial Flash Breakout Board

• 8Mbit 1.7-3.6V 85MHz • 100K E/W Cycles, 20yr Retention • 2 SRAM Buffers(256/264 bytes) • Flexible Erase: Page, Block, Sector, Chip • Adesto Driver Example Software Available • SMSTRS Wireless Platform Ready • COMING SOON SENSR-LOGR Software • AT45DB081 Packages: 8ld SOIC, 8ld UTDFN, DIE • Micro-Sized Eval Board(14.7×12.2mm) • 2.54mm(0.1”) headers on 12.7mm(0.5”) spacing • 128bit OTP Security Register • Ultra Low Power Consumption • 400nA Ultra Deep-Sleep • 25uA Standby • 7mA Low Power Read Current