This is a DIY RS485 to wifi adaptor which allows you to connect to your EPEver controller over wifi.Designed by Colin Hickey in United Kingdom
EU Shipping Please be aware that tindie has not put anything in place for collecting VAT so all items shall be sold as zero vat so the buyer is responsible for any local charges. CAN NOT ACT AS A P…Read More…
EU Shipping Please be aware that tindie has not put anything in place for collecting VAT so all items shall be sold as zero vat so the buyer is responsible for any local charges.
CAN NOT ACT AS A PASSTHROUGH
I have taken the previous design utilising an RJ45 socket and expanded it so that it is now surface mount only and utilises the popular wemos D1 mini which allows easier flashing and connectivity as it has a usb port built in. I will not be including a network cable as that is better sourced locally.
The next major change is that another device is no longer required if all you wish to do is check how your solar is doing, check your historical statistics or even switch the load on and off. This fits nicely if you have a solar setup where you would not want to be running a raspberry pi or similar just to connect to the charge controller. If you do have a more advanced setup however you can configure the device via the web interface to post the data direct to an MQTT or influxdb database. With this change however you can no longer use socat or similar to connect to the device and it has to either be viewed via the web interface or data pushed directly to MQTT or influxDB. If there is demand i can create another product which would support passthrough.
Many EPEver solar charge controllers have an RS485 communication port on them so you can connect a PC or Android device and read it’s statistics or update the settings.
Available as assembled only currently due to SMD design
The boards have been tested on the landstar and tracer controllers, I have not been able to test it with the new common negative tracer model.
It has been confirmed tested and working on the following boards - LS1024B - Tracer 3210A - MPPT Tracer1210 - Tracer AN - TRIRON Series with RS485 module
With the previous product it was a passthrough and as such required a raspberry pi or PC running permenantly to connect via socat or similar to pull the data. This new system allows the data to be viewed via the web interface without the need for a pi or PC but it can also push the data to MQTT or influxDB. This means if your PC or Pi reboots or is offline for any time the device will push the data as soon as it's back up without the need to restart services/reconfigure.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Epever RS485 to wifi adaptor v1.6 can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
Products are normally shipped next working day, however during busy periods this may extend slightly. Due to Covid still causing issues shipping can take upto 6 to 8 weeks so please bear that in mind before chasing up where your package is. It should be far quicker but please keep this in mind.
Tracked or Tracked & Signed options are available to most locations. This may not get your kit to you any quicker, but it adds peace of mind that you know where it has got to especially due to Covid delays.
It is your responsibility to pay any import duty or other taxes where appropriate.
Important note for European Union customers Tindie is unable to comply with new EU tax regulations, so you will have to pay VAT on your order to your local carrier when it arrives in your country. You may also have to pay import duty too. This is a legal requirement.
Yoshifumi | June 30, 2023
David | Feb. 14, 2023
Csaba | May 3, 2022
Andrew | May 4, 2021
Volker | June 13, 2019
Brett | Feb. 5, 2019
Michael | Oct. 30, 2018
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!