Divergence Meter Case ONLY for IN-14 Divergence meter (Version #3)Designed by Nixie Keith in United States of America
Silver Acrylic case for Stens;gate Divergence meter I wanted a case that was non-conductive and could be pieced together without the need for corner glue and stanchions. This case has dovetail fi...Read More…
Silver Acrylic case for Stens;gate Divergence meter
I wanted a case that was non-conductive and could be pieced together without the need for corner glue and stanchions.
This case has dovetail fingers for the corners and a solid bottom. The color looks like aluminum but is not conductive. The holes are aligned precisely for the IN-14 Divergence meter. It does NOT fit the IN-18. This is for IN-14 Divergence kits only. This also includes the top perforated board cut to fit the top (but with no holes drilled for corners to top. The builder has discretion for all configuration of this build.
This is VERSION #3 of this case. It has just enough room to fit a 9-volt battery below and just inside the case. It just barely fits. This is an improvement over the original case. I also added cooling slots on the bottom board.
There is a logo on the sides (shown in the diagram). If you do not want the logo, just place it facing inside so it does not show. If you want, you can add an LED and have it shine through the side with the logo (inverted) on the side, too.
|Shipping Rate||Ships From||First item||Additional items|
United States Postal Service: Standard Ground Rate
Luca | June 2, 2019
Armando | April 24, 2019
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!