12V Battery Docker is powered by USB TypeC with 15V PD Protocol. It has capability to charge 3*18650 Lithium Batteries with 2A MAX current.
Designed by B&Q Consulting Shop in ChinaSign up to get notified when this product is back in stock!
Temporarily suspend US logistics. Due to the recent high rate of random inspections by US Customs, although the packages will be released in the end, it usually causes a delay of 1 to 4 weeks.
Because Station Edition G1 could be powered by either USB Type C (PD Protocol with minimum 9V2A is required) or 2Pins Socket (Pitch=2.5mm, 8VDC-20VDC, 2A minimum). Power supply choice is very conveni…
Read More…Because Station Edition G1 could be powered by either USB Type C (PD Protocol with minimum 9V2A is required) or 2Pins Socket (Pitch=2.5mm, 8VDC-20VDC, 2A minimum). Power supply choice is very convenient, so that Battery Docker has been discontinued.
Shipping To: United States(US), Australia, Canada, Israel, Japan, New Zealand, Switzerland, South Korea
Design for Meshtastic Mesh Device Station Edition G1
| No. | Description |
|---|---|
| 1 | 18650 Batteries |
| 2 | LED Indicator (Green) for fully charged status |
| 3 | LED Indicator (Red) for charging status |
| 4 | Li-ion Battery Protection Circuit based on XB3303A |
| 5 | NTC Thermistor, muRata NCP18XH103F03RB, 10kΩ ±1% 3380K |
| 6 | CN3703 Li-ion Battery Charger Controller |
| 7 | USB Type C Socket |
| 8 | CN1 Power Output Socket for Station G1, 1*2P, Pitch=2.5mm |
| 9 | CN3 is a duplicate of CN2 except IO35, 1*10P, Pitch=1.5mm, please refer to the schematic for more information. |
| 10 | CN2 is used to provide battery gauge function for Meshtastic if it is connected to CN2 of Station G1, 1*10P, Pitch=1.5mm |
| 11 | Power Switch for Station G1 |
Sign up to get notified when this product is back in stock!
/i/999503/products/2022-08-21T16%3A54%3A46.897Z-meshtastic_mesh_device_station_edition_12v_battery_docker.jpg?1661075830)
