3.3V to 5V DC Step Up Boost Converter

Name: 3.3V to 5V DC Step Up Boost Converter
SKU: 4618
Price: 10.00 USD
Availability: Discontinued

Small 3.3V to 5V DC Step Up Boost converter based on the TI TPS61240, Breadboard Friendly

Designed by mozzwald in United States of America

Product Retired

This product is no longer available for sale.

The seller may be offering an improved version or it may be hanging out on the beach, enjoying the retired life.

While you're here, check out these other awesome products for sale!

Visit Store

More From mozzwald:

5.25" Floppy Disk PCB Lapel Pin

mozzwald

$8.00

i am root PCB Lapel Pin

mozzwald

$8.00

Linux Tux Penguin PCB Lapel Pin

mozzwald

$8.00

Super Mario Question Block PCB Lapel Pin

mozzwald

$8.00

More From DIY Electronics

duckyPad Pro: Macro Scripting Beyond QMK/VIA

dekuNukem

$84.99

uConsole USB ext. board

Joe

$40.00

Flipper Zero Black Onix Board

DTech

$100.00

Flipper Zero RFIDThief

Phrack Labs

$99.00

2015-03-22T13:24:30.774Z-tps61240-v2_front_coin.png

2015-03-22T13:52:02.616Z-tps61240-v2_front.png

2015-03-22T13:52:02.616Z-tps61240-v2_breadboard1.png

2015-03-22T13:52:02.616Z-tps61240-v2_back_coin.png

Small 3.3V to 5V DC Step Up Boost converter based on the TI TPS61240, Breadboard Friendly

Description This board is great for powering circuits that need 5V from a low input voltage such as a LiPo or 2+ AA batteries. The main IC is a Texas Instruments TPS61240. The enable pin is broke out…

Description

This board is great for powering circuits that need 5V from a low input voltage such as a LiPo or 2+ AA batteries. The main IC is a Texas Instruments TPS61240. The enable pin is broke out to both the input and output side to allow enabling/disabling the regulator from either side. The ENJMP pads are soldered with a 0 Ohm resistor connecting VIN to ENABLE allowing an always on state. The resistor can be easily removed with a soldering iron. The header pins are arranged so they fit in a standard solderless breadboard (0.1" / 2.54mm spacing). You will receive the board with all surface mount components soldered and 6 through hole header pins not soldered.