Connect any shield to an Arduino with a flexible flat cable up to 50cm in length. Use an LCD screen with a button shield without blocking!Designed by Nine Ideas in Netherlands
What is it? A simple stackable shield with 2 identical flexible flat cable (FFC) connectors that connect all pins of an Arduino R3 shield (including ICSP pins) to a second FFC shield so you're more...Read More…
A simple stackable shield with 2 identical flexible flat cable (FFC) connectors that connect all pins of an Arduino R3 shield (including ICSP pins) to a second FFC shield so you're more flexible in connecting shields. Say you want to use a button shield and an LCD shield; normally one would block the other mechanically. Either you can't access the buttons or you can't see the screen. Use it with the included stacking headers for flexibility or leave them off for a lower profile. Since every shield has 2 connectors, you can daisy-chain them together to form larger systems (keep cable length in mind as stray induction, capacitance and resistance will increase over length).
For a project I needed to mount an LCD in a small, thin part of an enclosure, with an Arduino + GSM shield somewhere else in the box. I ended up soldering flat cable to all the required pins, which sparked the idea for this product.
It's similar to the awesome Mama shield from Seeedstudio or Liquidware's Extender shield but with more flexibility in mounting. You could use one FPC shield on an Arduino (or other board with R3 layout), and use FFC's to connect up to 4 of the same shields with other shields on top. You could even daisy chain shields, but there are practical limits to signal and power integrity that are dependent on the application, the shields used etc. Because of the flexibility of the cable, you can even mount part of your electronics on a rotating part, through a hinge, on a sliding part etc.
Available separately is a 40 pins 0.5mm 150mm FFC. You could use your own cable, but there are some considerations (pitch, opposite contacts, not too long) to keep in mind. Also keep in mind that you'll need at least two of these shields, or roll your own PCB to connect to. The pinout is available on Hackaday.io.
A set of R3 stackable headers is included, but not soldered. So you're free to use other headers or solder a shield directly onto the FPC shield for a very thin connection. The shield is about 4mm high without headers. If you mount it on a headerless Arduino Leonardo, the package is less than 10mm high.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Arduino Flat Flexible Connector (FFC) Shield can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!