🧠 Overview

The Maker-ESP32 Development Board is a feature-rich ESP32 controller built around the ESP32-WROOM-32D module.
It is designed for maker education, robotics projects, and IoT applications, combining wireless connectivity, motor driving capability, and multiple expansion interfaces on a single compact board.

Unlike typical ESP32 dev boards that focus only on MCU I/O, Maker-ESP32 integrates high-current motor control and power interfaces, making it ideal for projects that actually move, react, and interact with the real world.

🔍 What is it?

Maker-ESP32 is a ready-to-use ESP32 development board that integrates:

• ESP32 dual-core MCU
• 2.4 GHz Wi-Fi + Bluetooth 4.2 (Classic + BLE)
• High-current motor driver (up to 3A)
• Servo ports and GPIO headers
• I²C / SPI interfaces (OLED-ready)
• External power input via screw terminals

All connectors are clearly labeled, making the board especially suitable for students, educators, and beginners, while still powerful enough for advanced maker projects.

🎯 Why did we make it?

Many ESP32 boards are excellent for firmware development, but real educational and robotics projects require more than GPIO pins:

• Motor driving without extra H-bridge modules
• Stable power delivery
• Simple wiring and clear pin labeling
• A board that works equally well in classrooms and workshops

Maker-ESP32 was created to lower the hardware barrier between learning ESP32 programming and building real, functional systems such as robots, smart devices, and interactive installations.

⭐ What makes it special?

• Built-in motor driver
  No need for external H-bridge boards — directly drive DC motors.

• High current capability
  Motor output supports up to 3A, uncommon on standard ESP32 dev boards.

• Education-friendly layout
  Clearly marked ports, grouped interfaces, and screw terminals for safe wiring.

• True all-in-one design
  Controller, motor drive, and power interfaces on one board.

• Flexible software support
  Compatible with Arduino IDE, ESP-IDF, and MicroPython.

🔧 Key Features

• ESP32-WROOM-32D module
• Dual-core Xtensa® 32-bit LX6
• 4 MB onboard Flash

• Integrated Wi-Fi + Bluetooth 4.2

• Motor Control

• Onboard motor driver IC
• Up to 3A output current

• Suitable for robotics and motion projects

• Expansion Interfaces

• Servo headers
• GPIO headers with pin labels
• I²C interface (OLED compatible)
• SPI interface

• RGB LED connectors

• Power Design

• External VIN input via screw terminals
• Designed for motor + logic power use
• Power switch and reset button onboard

🧩 Typical Applications

• Educational robotics platforms
• Smart cars / rovers
• IoT controllers with motion output
• Servo and DC motor experiments
• STEM and maker classroom demonstrations

📐 Specifications

📦 What’s Included

• 1 × Maker-ESP32 Development Board

(No motors, cables, or power supply included.)

⚠️ Notes & Disclaimer

• This product is a development board, not a finished consumer device
• External power is recommended when driving motors
• Intended for education, prototyping, and experimental use
• Users should follow proper electrical safety practices

🛠 Who is this for?

• Makers and DIY enthusiasts
• Educators and students
• Robotics beginners and hobbyists
• Anyone looking for an ESP32 board with real motor control capability