This Adapter provides a wireless/Bluetooth Connection of Joystick/Mouse, to any Computer Equipped with 9pin D Game/Mouse ports, like:

• Amiga
• Atari St/Atari 8bit (except Atari 7800 joysticks)
• Commodore 64 / Vic20
• Amstrad CPC
• MSX/MSX2
• Sega Master System

*Note: Amstrad CPC and MSX computers, needs also this adapter: http://www.ebay.ie/itm/272826287625?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

-Plug and play operation! Just connect the game/mouse port module to your computer and switch on the Mouse/Joystick module, After a few seconds, the bluetooth modules will be synchronized (blink twice every few seconds) and adapter is ready to use! (Note: When modules initially paired, you might get some lag of joystick/mouse action, but this happens ONLY for the first 2-3 seconds of usage. After that, there is practically no lag, any movement or button pressing, is instant. )

-Range: Up to 10meters

- Supports Auto fire function and 2nd fire button, for Amiga, Atari ST, C64 and Sega master system controllers/ Joysticks!

- Joystick/Mouse selection Switch (plug/unplug adapter after change), for using it with C64 (and possibly other home micros), to avoid conflict with keyboard! (For Amiga/Atari St, you can use mouse position for both Joystick or mouse)

-On computers equipped with two 9pin ports, like Amiga and Atari ST, you can use two adapters simultaneously, and have BOTH mouse/joystick or two joysticks connected wirelessly!

-Mouse/Joystick Module, uses very easy to find and cheap 3 X AAA baterries of any type (Nicd, NimH, NiZn, Alkaline,module needs at least ~4volts, so in case of NiCd/NimH batteries, be sure that they are well charged!), and it is also equipped with on/off switch to save energy!

-9pin D connector on Game/Mouse port module is attached on a ribbon cable in order to be used directly with Atari St equipped with tunnel ports