Waitlist

Check this other makers with their own take on Mayhem for Flipper Zero:

• For people from US: Thanks to a collaboration with cyber-bros, you can get this board from Virginia, USA!

• For people from EU: Thanks to a collaboration with SomeTomS, you can get this board from The Czech Republic!

Getting started

To set up your Flipper Zero and the module firmware, simply follow https://flipper.ried.cl/webinstaller.

This will give you access to the following features:

• The Marauder firmware, which is a portable penetration testing tool created for WiFi and Bluetooth analysis. The firmware also includes Micro-SD functionality, allowing you to dump pcap files
• Camera (2MP jpeg) and flashlight, accessed through the ESP32CAM Marauder app
• Gameboy-camera style (low res 128x64 bmp) with preview on the Flipper Zero
• Nanny cam (remote WiFi AP access to the camera stream)
• Morse flasher (use the flashlight to transmit morse)
• QR code reader
• Motion detection
• External radio (w/CC1101 module)

Depending on your Flipper Zero firmware, you also need other .fap apps for:

• NRF24 for sniffing and mousejacking (w/nrf24l01 module)
• Other sensors (i.e. temperature/humidity/distance/movement/knock/buttons/etc)

Check also:

• Marauder
• flipperzero-camera

Included parts

Video with some functionality (previous v1.1 hardware): https://youtu.be/KbBgIg76SMw

• ESP32 (bluetooth and WiFi) with 2MP OV2640 Camera Module, 8MB PSRAM, Micro-SD slot, external antenna connector and flashlight LED (module) (alternative: OV2640 21MM 120°) (header)

• Extra module (header), one of:

  • NRF24l01 (module) (alternative: w/SMA antenna) (alternative: w/SMA antenna front)

  • CC1101 (w/coil antenna) (alternative: w/SMA antenna)

• Extra pins for connecting sensors and prototyping: any 3 pin sensor, 3V or 5V with any pin order can be connected easily

• Sleek & flip-able PCB module for your Flipper Zero (header) (cap)
• Optional TPU printed pin header protector (check master/parts/ for the .stl file) (tpu filament)
• Optional custom Micro-SD

IMPORTANT: If you order the PCB only, you need to buy the parts individually.

Mayhem

PCB

The module is designed to be flip-able, making it easy to point the camera back or forward. Check out the image below to get a better idea of the design:

NOTE: If you only need the camera for selfies, for example, the top pins can be skipped. If you have any special requests like this, please leave a comment when ordering.

Micro-SD card

Works perfect on the Flipper Zero and ESP32. Will hold the equivalent of thousand five hundred 35mm Kodak ColorPlus rolls with photos from the OV2640 Camera.

More functionality

Join in on the fun and contribute to the development. You could add new functionality, such as:

• Actions based on camera detection (i.e. turn on a TV via IR when some face is detected, open the garage door if a number plate appears, etc)
• Barcode reader
• Record videos
• Operate the SD card from the Flipper
• Print photos from the camera to a thermal/photo printer, using IR (Flipper) or BLE (ESP32)
• Send your suggestion (or just hack the code yourself)