An add-on board for ubitx transceiver for amateur radio digi modes
Designed by elekitsorparts in ChinaThis product is no longer available for sale.
The seller may be offering an improved version or it may be hanging out on the beach, enjoying the retired life.
Notice For EU Buyers: All of the prices here DO NOT include the VATs, you may have to pay VATs at delivery.
The uBitx digi-interface module is an add-on module board for uBitx transceiver. It features with full isolation, single usb for CAT and Audio control, and Rx and Tx audio level controllable. With th…
Read More…The uBitx digi-interface module is an add-on module board for uBitx transceiver. It features with full isolation, single usb for CAT and Audio control, and Rx and Tx audio level controllable. With this add-on board, the uBitx is able to work on ham radio digital modes, FT8, JT65, PSK or RTTY etc. The digi-interface module is easy to install, you could either install it on top of uBitx main board or mount it on the rear panel of your uBitx radio. The key step of the installation is to solder the RX, TX audio and 5V power supply to the digi-interface board. The uBitx radio's PTT is controlled by PC via radio CAT protocol, and the protocol used for radio communication is Yaeasu FT-817. You could even use the module's USB port for firmware uploading with Xloader. The Tx and Rx audio could be controlled by PC or the 2 potential meters.
Features:
Fully Isolated, even with USB Connections Single USB Port for CAT, Audio and Firmware Upload Flexible Installation, Panel Mount or via Cable connection RX and TX Audio Level Controllable
Specification:
Power Supply: 5V via uBitx Raduino and PC USB (150 mA) Audio Freq Response: Approx. 200Hz - 4000Hz @ 600 ohms Sampling Size/Rate: 16 Bits, All standard rates are supported up to 48Khz PC OS: Windows 98SE, ME, 2000, XP, Vista, Windows 7, 8.x and Windows 10 Radio In/Out Z: 600 Ohm (nom). TX/RX Levels are fully adjustable PTT Control: via CAT commands Radio Connection: TRX-GND, TX-Audio, TRX-GND, RX-Audio, TRX-GND, 5V PC Connection: USB 2.0/3.0 Compatible, Standard USB "B" type connector Other Connectors: TX Monitor - 3.5mm mono* Dimensions: 3.93" x 2.36", 10cm x 6cm Operating Temp: -30C to +60C
By clicking Register, you confirm that you accept our Terms & Conditions
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!