Tindie
3D Printed Holo Clock
Add to Wishlist
On Wishlist
On 18 Wishlists
A 3d printed clock that's fun to assemble yourself
This is a simple clock based on a single geared stepper motor from Nippon ... The motor is basically a 1:10 geared motor working at 18v with a 3mm shaft. The single motor is driven by an ATtiny2313 and l293dd circuit with the coded written in Arduino IDE. The single motor moves a gear train which in turn moves the minute ring and hour ring. The ATtiny pulses the motor every minute to move the minute wheel and the hour wheel.
You can download programming instructions from my Github (PDF).
Kit includes:
- 1: all plastic parts
- 2: motor
- 3: 220v 18v 1 amp power supply
- 4: fasteners
- 5: assembled PCB
- 6: programmer
Holo clock review
Jan. 19, 2017 - 3D Printed Holo Clock
I like the design of the clock but we can see it was not made by a clock-maker by the choice of its motor.
It seems to be working ok but it is much too noisy to be kept running all the time. Too bad because it is
really original.
It seems to be working ok but it is much too noisy to be kept running all the time. Too bad because it is
really original.
Response from the Seller
Jan. 21, 2017
The clock only pulses once in a minute making a sound of 25 db. So i wont call it noisy!
Rates to United States
| Shipping Rate | First item | Additional items |
|---|---|---|
|
EMS: Standard Ground Rate
|
$15.00 | $0.00 |
Store Owner
- Mectok
- 15 orders / 1 review
- Since Oct 23, 2016
- beijing, China
-
ekaggrat singh kalsi
- Custom Work
