THE PARTICLE PHOTON 4 CHANNEL RELAY SHIELD IS PERFECT FOR AUTOMATING YOUR PROJECTS OR CONTROLLING OVER THE INTERNET!

PLEASE READ AND FOLLOW THE SHIPPING INSTRUCTIONS, ORDERS WITH INCORRECT SHIPPING WILL BE CANCELLED. THANK YOU.

Description:

The Particle Photon Relay Shield was developed so that anyone could dive right into the IoT world. It can be used to control lights, motors, solenoids, and many other electrical items. The Blynk App can be used to create an app for easy control right on your phone. It has 4 relays on board that are directly connect to 4 independent digital I/O pins that are used to switch the relays on or off based on the state of the digital pin (HIGH or LOW). Each relay has its own 3-postion screw terminal labeled, NO, C, or NC, for Normally Open, Common, or Normally Closed respectively. Each relays contact current rating is 10 amps and switching voltage rating is 277 Vac and 24Vdc max. Power can be supplied to the board by either the 2.1mm barrel jack connector(similar as the one on the Arduino Uno), or the 2-position screw terminal. The recommended supply voltage is 12Vdc for the board, this 12 volts will be regulated down to 5V with a max current capacity of 1.5 amps for the voltage regulator. A breadboard type space has been added so that additional electronics can be added to the board such as sensors or other control circuitry. The external circuits can be connected to the photon via the added female headers that are labeled with their respective pin out on the Particle Photon.

Applications:

• DIY Electronics
• Home Automation
• IoT Applications
• IoT Prototyping

Specifications:

• Fully Assembled
• Input Voltage: 12Vdc
• Current Rating: 1.5A max
• Barrel Jack & Screw Terminal Power Supply Input Connections
• 4 Channel Relay Control (isolated optocoupler control, protects/isolates the photon)
• 0.1" Grid (for adding other electronic components such as sensors, etc)
• Sleek Black Finish

Relay Specifications:

• Contact Current Rating: 10 Amps
• Switching Voltage: 277Vac/24Vdc

Particle Photon Not Included.

Visit the Particle Store

Why did you make it?

The Particle Photon Relay Shield was created so that beginner as well as advanced hobbyist and makers could dive into the world of IoT devices and control things of the internet. Its a great tool for a standalone project or for just prototyping.

What makes it special?

What makes the Particle Photon Relay Shield special is that its compact, can control 4 relays independently of each other, has female headers for external signals, as well as a space for adding your own circuit to the board.

VIEW THE INSTRUCTABLES LINK TO USE WITH THE BLYNK APP

CONTROLLING RELAYS OVER WIFI

Shipping Instructions For Inside the United States of America:

Based on the quantity of your order please choose the correct shipping option.

USPS

• Qty 1 - 3 -> Priority Mail Flat Rate Small Box
• Qty 4 - 20 -> Priority Mail Flat Rate Medium Box
• Qty 20+ -> Priority Mail Flat Rate Large Box

UPS

• Qty 1 - 10 -> UPS: Ground Small

Shipping Instructions For Outside of the United States of America (International Orders):

To place an order please contact the store at contact@brlabelectronics.com, provide a list of the items and quantity you plan to order. A shipping address and your preferred method of shipping from the options below:

• DHL
• UPS

With this information shipping will be calculated and emailed back to you. If you wish to proceed the shipping option will be added for you to checkout.