A solution to a problem you barely knew you had!Designed by Brian Lough in Ireland
What is it? The D1 Mini Breadboard Buddy is a PCB designed for the D1 mini ESP8266 board that frees up some room on your breadboard. Why did you make it? It always found it a little bit frustrating...Read More…
The D1 Mini Breadboard Buddy is a PCB designed for the D1 mini ESP8266 board that frees up some room on your breadboard.
It always found it a little bit frustrating that there was only one slot available in a breadboard for each of the pins of a D1 mini, so if you ever needed to connect multiple things to a pin, you would have to bring a jumper wire from that pin to another area of the board. With this you have the 4 slots available for each pin of the D1 mini.
Not much to be honest, the PCB is a pretty similar blue to the D1 mini?
It DOES NOT include an D1 mini EPS8266!
The female pins are to be used as a socket for the D1 mini and the male headers are what will be inserted into your breadboard.
The top of the PCB is the side that had "USB" and "Antenna" text.
Female pins should be placed on the top side of the board (so should be soldered on the bottom side).
The male pins should be placed on the bottom side (soldered on the top side)
Take a look at the photos if unsure.
|Shipping Rate||Ships From||First item||Additional items|
An Post: Standard Ground Rate
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!