SEVEN SIGNALS ENTER ONE SIGNAL LEAVES

Who wants a mixer with only three or four inputs? Get outta here! This bad boy has seven inputs for your mixing pleasure - each with their own attenuator - and one master volume control to keep everything under control.

Inspired by the CP3 mixer and the current electronic parts shortage, the CP7 sounds and works like other audio mixers when the gain is below 50% - but once you get the knobs up to around 3 o'clock you're going to get some sweet, sweet analog clipping. Ohhh it sounds so good. Push it all the way and you get a touch of harmonics to color the sound in amazing ways. Plus it is louuuuuud, Guaranteed to fatten things up.

Want to mix CV instead of audio? Well guess what- it does that, too!

The CP7 is 100% analog and 100% discrete: there are no computer chips here, just transistors, resistors and capacitors. The panel is FR4, and the module itself consists of two boards. Each module is fully tested and comes with a 10" standard 16-pin to 10-pin Eurorack power cable.

Here's an audio clip here featuring the CP7: https://soundcloud.com/cowalker/keep-dreaming Seven square oscillators tuned to various notes of a major chord are sent into the CP7. The CP7 goes out to delay/reverb and then to the recording interface. I 'played' the song by raising and lowering the volumes of the channels on the CP7.

Each CP7 module is hand-soldered by me, in the middle-of-nowhere Pennsylvania. If there are any problems, just email me and I will be glad to help!