Officially Approved Made For ESPHome 30A DC 5V DC 7-28V Inching/Self-locking Relay Switch

Specification Operating voltage: 5V/7-30V

relay on/off status respectively

Supports to control different voltage ranges

Board consumption: <1W

Standby current: 80mA

Max input current: 30A

Max Wattage: 6600W

Relay lifespan: ≥one million times

100M electrical insulation resistance

Electric shock voltage: 1000V

Relay maximum pull time: 15ms

Relay maximum release time: 5ms

Working mode: inching / self-locking

Wireless Standard: 2.4GHz, 802.11 b/g/n

Application: access control, turn on PC, garage door, etc.

Computer application: Remote control computer boot

Operating temperature: -40 degrees to +70 degrees

Operating Humidity 40%-80% RH

Self-Locking Mode The default setting of this product is Self-locking mode

Inching Mode To switch self-locking mode to Inching mode, just use command line input: PulseTime 1

Inching mode automatically working 1 Sec.

Restart

To restart the board just press the button on the board

Reset

To reset the board, Please use jump wire connect GND to TX for more than 6s and disconnect it. The board will be reset and you need to reinstall it again.