ESP32 Ethernet network shield

Name: ESP32 Ethernet network shield
SKU: 30385
Price: 12.50 USD
Availability: OutOfStock

ESP32 Ethernet shield for DIY projects

Designed by Shields and more in United States of America

2023-05-20T17:48:27.307Z-ESP32 ethernet_front.png

2023-05-20T17:20:54.726Z-ESP32 ethernet_bottom.png

2023-05-20T17:20:54.726Z-ESP32 ethernet_top.png

$12.50

Out of Stock

Sold out since Sep 25, 2025

ESP32 Ethernet shield for DIY projects

ESP32 Ethernet Shield is a small form factor board that adds 10/100Mbps Ethernet to your DIY projects. It can be used with any ESP32 based project so as long the pinout described below is free in you…

ESP32 Ethernet Shield

is a small form factor board that adds 10/100Mbps Ethernet to your DIY projects. It can be used with any ESP32 based project so as long the pinout described below is free in your project. It also works as a Shield with ESP32 WROOM 16MB USB-C D1 Mini32 form-factor board or other compatible boards.

ESP32 Ethernet board pinout

Board is powered with 5v and it has an onboard LDO 3v3 regulator to power the LAN7820 IC, Board logic levels is 3.3V!

Configuring your ESP-IDF or Arduino projects please take the following into account:

Set the type to LAN8720
RMII clock is sourced by the ESP32 so set it to ETH_CLOCK_GPIO17_OUT
The LAN IC is powered off by default, it needs an enable (HIGH) signal on GPIO5, then the board will supply power to the LAN IC.
The Physical Address (PHY Address) for the IC is 1.

IF using ArduninoEspressif32 ETH library here is example for board configuration