This small circuit board is designed to make it easy to interface a 4 wire touchscreen FFC cable to a JST SH 4 pin connector.

I created this board because I could not find a good way to hook up a 4 wire touchscreen FFC cable to a single board computer that I was using for a project. Instead of hand soldering a less than ideal solution to make a cable, this board allowed me to fabricate 4 wire cable using a JST SH connector and interface that to the JST connector that was on my single board computer.

It is fabricated as a single sided board with no solder mask on the back side. That allows you to use glue or double sided tape to mount it.

It is approximately 15mm x 25mm. It connects all the pins straight through. It uses a Molex 0528080471 and a JST BM04B-SRSS-TBT(LF)(SN)

I hope this helps someone else solve the same or a similar problem.

I only have a few built up and ready to ship. If for some reason you need a large quantity please contact me.