Tindie

Avatar

Travis Lin

2,722 orders since Apr 11, 2016

Nanjing, Jiangsu, China

View Store

My WeChat：346845720 E-mail: lspoplove@naver.com .

Overall Rating:

Review Breakdown

5
40 4
37 3
17 2
4 1
3

View All Reviews

Average Ratings

Product: (4.57)

Documentation: (3.90)

Shipping: (4.31)

Communication: (4.48)

All Reviews

|

Well made, well ship. Good product and service

For DSTIKE IPEX 8dBi Antenna for ESP-07/ESP32-Wrover

Took 2 weeks to reach my place but i took the simple shipping. Support is very responsive. This dealer is professional, I recommend.

|

Bon produit, bon emballage, livraison rapide.

For DSTIKE Deauth Detector V3(Pre-flashed)

Une commande en chine peut être un peu stressante, mais pour le prix, ça vaut parfois le coup.
Celle-ci est passée rapidement et simplement, le dialogue avec le vendeur est rapide (anglais).
Une semaine pour arriver en france et une autre semaine pour être livré avec un suivi en france "aléatoire"...
Le produit est bien fini et marche parfaitement.
Il est également possible de le transformer en Deauther en fouinant un peu sur le net, pour s'amuser un peu plus.
Ma commande s'est bien passée, aucun regret.

|

Cool, Discrete Solution

For DSTIKE WiFi Deauther Power Bank DIY Kit V2

The construction looks pretty much like a normal Powerbank, including printed specifications so quite discreet.
I have two slight problems with it. Firstly, the PCB only just fits and pushes on the next-to-last Li-ion Battery (the "last" space is empty anyway.) Secondly, there's no way to get at the board to reset it once the case is closed. Thirdly (no one expects the ...) the board is powered on while charging the powerbank, this makes it less discrete and makes charging take a bit longer.

|

Excellent little device

For DSTIKE Deauther Wristband V2

In terms of delivery (especially for goods being sent from China): 10/10 - Excellent fast delivery
In terms of the product itself: 9/10 - Very simple to use, does exactly what it is meant to do, and the fact it is a "wrist watch" is super cool.
My only minor quibble (hence the 9/10) is documentation. There is essentially none, other than a series of web-links and a lot of googling. A (single) user manual (even basic) describing use would be really useful.

|

Fantastic development board for ESP8266

For DSTIKE Deauther Wristband V2

Fantastic development board for ESP8266. Has everything I need; fast microcontroller, wifi, leds, buttons, charging circuit, rechargeable battery, antennas, small factor, display and is not expensive, you get a lot for the money plus fantastic people who know their stuff. Thanks guys.

|

Fun item

For DSTIKE Deauther Wristband V2

I ordered this item and me being me, I totally forgot about it until it arrived. When it did arrive, I was overjoyed at the design, the size and the layout. It's fun to use, especially on my housemates.

|

Fantastic Product

For DSTIKE Deauther Wristband V2

In terms of customer service: 10/10.
In terms of delivery (especially for goods being sent from China): 8/10 - Much faster delivery than goods bought off ali-express. In fact, the delivery puts ali-express to shame.
In terms of the product itself: 10/10 - Very simple to use, does exactly what it is meant to do, and the fact it is a "wrist watch" is super cool.

|

REplacement also defect ""

For DSTIKE Deauther Wristband

Fucked me up .... 2rd product and defect!! i hope antoher product is better how the wristband deauther i taste it later

|

Perfect, Thanks

For DSTIKE WiFi Deauther Monster

Thats a great product, very well designed and manufactered. Works like expected. Fast delivery. Thank you.

|

Awesome Product

For DSTIKE WiFi Deauther Monster

I love this thing.

I already had some 18650 batteries laying around and fully charged waiting for it to arrive.

It took longer to get here then I would have liked - but that is shipping from China I suppose.

All components are professionally soldered and the acrylic case that is included is awesome. Once the batteries are inserted and the case is installed you can just use the micro USB to charge them.

This thing uses just a bit of power and the dual 18650s will keep it running a LONG time (more than 24 hours)

The external ant is a bit of a pain as there is no where good to put it. I solved this but sliding it into the acrylic case with the batteries. I can remove it and hold it in the air (i guess) if I ever wanted to.

One thing to note - if you read the github. This device broadcasts a website. the device is much more valuable and configurable if you use the site.

Once you do a scan use your phone or PC to connect to the SSID and then point your browser to 192.168.4.1. While this is clearly documented, I wish someone would have told me this info when I first got the device.

all in all 10/10 would buy again (but I hope I never have to)

|

Great product

For DSTIKE Deauth Detector V2(Pre-flashed)

Great product.. i will order again but i want to fast shipping.. the shipping it take 2months before arrived

|

Amazing product

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

Package arrived very well in only about a week and a half. He was very quick to respond to any question I had. Very impressed with the hardware. Took a few minutes to screw in the plastic shield and it was ready to go. Product works great and was a total blast to mess around with. Would defiantly recommend to anyone.

|

Perfect nifty device

For DSTIKE WiFi Packet MonitorV3 PCB antenna version

Device does what is claims, seems to be well designed and looks well manufactured. There were no problems using the device or viewing the .pcap files in wireshark. The only negative thing I could think of is that you really need to format the uSD card. That said, it is clearly stated on the website and if you forget to do so and it doesn't work because of that, you will discover it the moment you switch the logging on which is ok. Great device and also a nice development platform for other ESP32/OLED/uSDcard projects. The source code is very readable and is therefore of educational value as well. It is a great time to live in.

|

Nice piece of hardware

For DSTIKE WiFi Packet MonitorV3 PCB antenna version

This was to get a first hands-on on a ready-made ESP32 plus display. While I plan for an all-in-one solution using a larger display, this itsy-bitsy module will be nice to evaluate these functions while I'm waiting for my larger displays.

|

The product works and the seller is amazingly nice

For DSTIKE NodeMCU-07 V2

Got the product and it works really nice, seller answered my questions and provided blueprints and diagrams for the product! really nice seller!

|

Fantastic All-in-One Microcontroller

For DSTIKE D-duino V5

I've been using these for all my new projects, and so far have not regretted it--the price is very reasonable for the features you get.

Having the screen built-in makes development and maintenance much easier, because you can see right there what the status of the controller is at any time.

This model also adds an external antenna which is a nice touch and gives some flexibility for range and placement of devices.

The switch to ESP07 (1MB flash) does mean you will need to lower your SPIFFS allocation if you want to do OTA stuff.

|

Great item. Works

For DSTIKE D-duino-B V5

Works as spec'd. I don't really want to typr in 100 characters just to Leave a favorable review. Need 2 more.

|

Great item. Works

For DSTIKE D-duino-B V5

Works as spec'd. I don't really want to typr in 100 characters just to Leave a favorable review. Need 2 more.

|

Fun gagdet

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

This board was easy to put together and fun to use. I have only 1 negative comment. The problem was the USB port for external power snapped off on about the 6th use. I will admit that the USB cable connector I used did seem to not be of the best quality, but I wasn't putting excessive pressure on the plug. I was unsuccessful in re-soldering the port back on the board so I'm ordering a second board and will be careful when plugging/unplugging external power sources in the future. Of note: the battery will not power the board once the USB plug has been removed.

I was very happy with the performance of the device while it was working.

Edited because I realized I made a negative comment about a different product I ordered. Only one negative point on this product!

|

Great product

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

The Wifi deauther Oled V2.6 Works fine nice product a lot of WIFI AP are not updated to the latest security levels.

|

Great platform

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

A nice portable platform for Wi-Fi hackery as well as its intended purpose. Travis responded quickly to an issue I had, resolved 100%, quickly and easily.

|

Amazing product.

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

Man this is truly a great product, With the deauther pre programmed in works very well, Thank you for the response the good product.

|

good product and nice seller

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

Its a nice designed board and it works straight out of the box.
You can also flash the board by yourself if needed. Its a great product.

I had some shipping problems but the seller was very helpful.
Thank you very much!

|

Good product; possibly prone to user error

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

Got the deauther quicker than expected, worked fine out of the box. Then I mistakenly put the battery in backwards and fried the charging chip. So don't do that.

|

Good Product bad QC

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

Edit 14th Nov 2017: Travis sent me a new board, with problems mentioned below fixed, it's working well with battery and USB port problem is also fixed. Thanks Travis :)

Received the order in acceptable time frame, everything was good except.

1.) USB port was not soldered correctly, it ripped off on very first plug out.
2.) Used 18650 Li-ion cell and it smoked, i am sure about polarity, don't know what went wrong.
3.) Love the product but poor quality control, not only way to use it is to power it from pin header.
Avatar
Response from Travis Lin | Oct. 16, 2017
I am improving this product.
Looks like your product has a big problem.
What is your order number?
I can send you a new one

|

A+ Seller & (newly improved) Product!

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

Beautifully designed board, pre-compiled w/ Spacehuhn's DeAuth coding.
The external antenna provides a Much longer range than those without external antenna (I was honestly surprised by the Significant range increase). The on-board OLED screen allows one to either connect remotely to it & execute commands or simply use the buttons & screen on the board to execute actions without wirelessly connecting to it (giving it more of a plug-&-play style feel).
The updated design is quite nice, namely the improved battery-life & certainly the new buttons, which are not only of better quality than before, but are now more appropriately positioned to allow much easier physical access (especially w/ the clear front shield attachment).

The seller was of great help, replied to ALL of my (many) questions & concerns. Fast replies & great shipping!
'Would recommend this seller to any friends or family & I'll personally be ordering from this seller again very soon!

|

Works just as described. Fun to use.

For WiFi Packet Monitor (Preflashed D-duino-B)

The device came with a short USB cable, so I could plug it in right away and it worked exactly as described. It monitors one channel at a time, and provides a count of the activity on that channel every few seconds. Along the bottom of the display, it shows a running graph of counts over time. Since the code is available on github, I'd like to modify it to show activity over all the channels simultaneously, at least as one option. In addition, the unit could be programmed to do almost any type of IoT device that needs a small display for the user to see what's happening. For example, it could show the output from a wifi weather station, or a remote sensor, or even a group of remote sensors.

|

Just, a really good product.

For DSTIKE WiFi deauther OLED V3.5 (Added RGB LED)

I bought this and I just received it today along with my x-ring, the shipping was okay took them a while but that's what you get for 5$ shipping. Anyways, the screen is just huge along with the text. Here's a picture of the Wifi Deauther Preflashed OLED compared to this one: https://gyazo.com/e752f5a1b76f6afbaaa98649960ce384 (the picture is looks smaller than in real life). The product came in safely intact and everything worked well and the buttons were moved into more comfortable positions. It worked like it said it would. Perfect. edit: after two days the circuit board got messed up with the antenna, just a mistake from the seller.

|

Wish battery voltage measurement was on board

For Pocket 32 V2

I bought a couple of these Pocket32 V2. Nice idea to include battery holder attached to board. Actually, I had one holder come unattached at the + end. I re-soldered easily. No problem for me. However, I wish a battery voltage resistor divider to a analog input was included on the board. I would guess most folks who would buy this would want to be able to read the battery voltage. And with the ESP32 there are certainly enough analog pins. I can build my own resister divider and the software is easy, but it doesn't appear the battery voltage is brought out to an accessible header pin. Please inform me of the easiest hardware connection methods to measure 18650 battery voltage.

Update 5 Sep 2017. After using the Pocket32 V2 board a little more, I have some additional comments which may be of interest to other folks considering this board for battery-powered purposes. First the good news. The seller seems to be very prompt in responding to my comments, both here and via private email. I believe he is very interested in customer comments and improving his products. Also good to know, both of my boards have the latest rev1 silicon for the ESP32 chip. This fixes several issues with the original rev0 silicon.

And now the bad news. If you want to use this board for long-term battery powered applications using the deep-sleep function of the ESP32, you will likely be disappointed. My measurements indicate 15mA from the battery during deep-sleep. (Note this is with rev1 silicon and Arduino IDE fixes for deep-sleep.) The ESP32 alone should only draw around 10 micro-amps during deep-sleep, not milli-amps. The seller believes the main reason is the charging system. The board uses a TP5410 which is a boost regulator which works something like this: 3.7V from 18650 battery --> TP5410 boost to 5V ---> regulated down to 3.3V for devices on the board. Further research on the internet tells me designs using this TP5410 are not meant for lengthy stand-alone battery use. Much too power inefficient. The board will be fine if constantly connected to USB for power and then 18650 will be the auto backup supply. Also, as I stated before, it doesn’t help that there is no way to programmatically monitor the actual battery voltage on this board.
Avatar
Response from Travis Lin | Aug. 20, 2017
Sorry for my mistake of unsolder the holder.
I do not have experience of how to measure 18650 voltage by esp32.
I will do some research about how to measure it.
If you success please also inform me I can make a V3 Version.
Thank you very much.

|

nicely designed product / shipping good

For X-OLED(1.3 IIC Tiny OLED)

The "1.3 IIC Tiny OLED" is a nicely designed product,
it don't waste any square-mm of precious space on you PCB.

Shipping to Europe ran smoothly and quickly enough.

There could be more documentation especially what voltage levels are allowed on the I²C lines, in case the supply voltage is 3.3V or 5.0V.
The I²C address is fixed and can not be changed.

|

nicely designed product / shipping good

For 0.96 IIC Tiny OLED

The "0.96 IIC Tiny OLED" is a nicely designed product,
it don't waste any square-mm of precious space on you PCB.

Shipping to Europe ran smoothly and quickly enough.

There could be more documentation especially what voltage levels are allowed on the I²C lines, in case the supply voltage is 3.3V or 5.0V.
The I²C address is fixed and can not be changed.

|

Great product for educational

For WiFi Packet Monitor (Preflashed D-duino-B)

This is a great product for educational focus. I use this in my classroom when I want to explain the use of Arduino and graphical primitives.
Great Work!

|

Great product!

For WiFi Packet Monitor (Preflashed D-duino-B)

Really nice device, great to see whats going on around you in wifi packets on each channel(not just your own network). Easy to use as well just plug in micro usb power and you get right into it.

|

Very good, thanks

For D-duino V2(Arduino&NodeMCU&ESP8266&0.96OLED)

First unit was wrong, after a quick comunication with the seller, he replaced it very fast.
Product is just as described
Page 1 of 2
× Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.