Great little mixer, easy to build. One crucial advantage for me was the included solder which is very high quality and let me think about changing and use this in future.
Unfortunately Rakit mismatched the resistors and delivered no 100k but too much 10k. I complained via tindie message but got no response (after 4 days). I ordered two Rakimixes and both were wrong packed. Fortunately I had some in stock and could finish and use the mixer.

If you are like me and are recovering from a bad case of GAS (Gear Acquisition Syndrome), this kit is the prescription (and an absolute bargain!)

Suppose you went crazy earlier this year and have amassed a pile of... oh I dunno; Korg Volcas. You now have a problem on your hands; How do you get all these compact sound machines combined into one mix? You could buy a Volca Mix for $200 and get 3 channels (I couldn't talk myself into parting with the cash just to keep the same footprint). Or you could grab a 4-channel mixer with a built-in DSP from Amazon for $100. It works pretty darn well, but it's a too bulky and heavy. Not ideal.

Enter the RakiMix. It's about the size of a credit card, sits on little plastic standoff legs, and is powered by 9v DC. A wall wart power adapter will work but the kit comes with a very adequate 9v battery clip. For the price of the amazon mixer, I can buy 2 or 3 of these and chain them together. For the price of the Volca Mix, I can buy 4 or 5.

I don't know what else to say. If you want a basic, compact, easy to use mixer, there's nothing else that compares. They are also fun to build.

Hypothetically, you could stack 4 of these into the signal chain with your $100 amazon mixer, and multiplex your mix to 16 tracks (20 tracks if you include the RakiMix's aux input). Alternatively, you could pull this out of your pocket on jam night and be the hero when your crew runs out of mixer inputs. It's basically like a roll of sonic duct tape. Just sayin'... Or maybe it's more like a sonic Medusa, but instead of the snakes turning people to stone, they zap detuned sawtooth waves into the air like something from Nicola Tesla's daydreams. Or maybe you could nickname your RakiMix Cerberus, the multi-headed dog who loves to chew on juicy bass bones. I'm running out of pop-culture mythology references. Something something ...Zeus? Enjoy your RakiMix. That's what it's there for!

Wow! The Rakit Drum Synth kit was a pleasure to build, and is so much fun to play!

I had the wise foresight to order a bunch of items from Rakit, and the package was crammed with all kinds of bonus swag that had me smiling ear-to-ear! An origami IC chip kit, several very funny stickers, some very cool logo stickers, and.... CANDY!

[ THE UNBOXING ]
When I first opened the package to inspect the contents, I was a little intimidated by the number of resistors in the BOM. My anxiety was eased by the fact that the resistors all came packaged in a small waxed paper envelope which was printed with large COLOR ILLUSTRATIONS of the resistors and their corresponding values.

The PCBs came in two sheets: the front panel, and a multi-piece snap-apart panel with the base and side panels. These sub-PCBs snapped cleanly along the pre-scored lines, and I was required to do LITERALLY no finishing of the edges. Could not have been easier.

[ THE BUILD ]
I followed the build document and assembled the unit in no time! (perhaps two hours, at a leisurely pace). When it came time to install the myriad resistors, I was very very impressed with the level of detail built into the online build document. There is literally an interactive map of the resistors, such that when you click on the resistor value on the table list, every resistor's place of that value stands out proud in color on the black and white outline depiction of the board! Having this aid made this tricky phase of the build process very confidence-worthy.

I was also impressed at the level of detail put into consistent component footprints, The authors/designers noted that for polarized components, there is a square solder pad, and a round solder pad, and they kept the convention consistent throughout the entire kit.

Once fully assembled, the unit is quite compact. It's footprint is about the size of a large computer mouse.

If you are considering this as your first intermediate-level build, I think you should go for it. It was my first, and I'm very happy with what I was able to produce.

[ THE SOUNDS ]
This little gadget really defies being defined as a "drum", but I suppose they had to name it something! With its simple envelope parameters (decay knob, sweep knob, sweep direction switch, and Attack on/off switch) you can achieve sounds which range from percussive, to springy. This box is particularly good at making a distorted kick drum sound that would be right at home in an in-your-face chest-collapsing 4/4 hardcore beat. And so far, I've only been describing what the square wave oscillator can do. It also has a triangle wave! The triangle wave can make some more neat percussive sounds! Wanna make an 808 Cowbell? Try this!
VCO: Triangle
Pitch: 5.5
Decay: 3-7 (5 is right up the middle and works well)
Sweep: 0
LFO Rate: 9.5
LFO Shape: Triangle
LFO Depth: 6 (go a little higher than 6 and it starts to sound like a steel drum, go much higher for some gnarly FM-esque tones!)

Notes about the LFO: I think this LFO goes as low as 4Hz (if I recall correctly), and once you get the LFO rate knob above 3, the LED (oh yeah, there's an LED that telegraphs the LFO's rate) appears steady-on, which suggests somewhere around 30Hz, and I'm guessing max has to me somewhere around 100Hz. With an LFO that fast, you can actually produce some pretty legit FM synthesis sounds. I don't know if this is technically correct, but the math seems to make sense in my head.

The kit includes a barrel-jack adapter with a 9V battery clip, which is nice. I can just leave the clip on the battery and chuck it in my bag without having to worry about short-circuits. When I want to have a play, I just plug in and start tapping.

So, yeah, it has a line level mono out, which sounds great through external amplification. When I plug my headphones in, I get a faint signal in one ear, but I don't suppose it's designed to be played that way. It has a mono jack input for trigger (as an alternative to the piezo tap sensor built into the front panel) which works well, and it has a mono jack input for pitch CV. I don't know if the pitch follows the 1V/octave convention, but I can confirm that it does indeed work!

Now that I've finished writing this review, it's clear to me that I really want to order another one! You might as well add 2 to your cart ;)

This little box has a voice that fits in great with my little mini-rig.
I have it paired to a Baby8 for doing on the fly adjustable fills from the sequencer, and it works great!
It's a fun build, too, with the directions being very clear, and easy to follow.

By itself, it makes a good drone generator.
With a Baby8, you can do some pretty sweet, but simple, things. Worth the price and time to build!

This build results in a neat little 8 step sequencer, which can be run directly off of Korg's clock pulse.
I've got mine set up to share pulse with a second one so that the Atari MPC and the Metal (both from Rakit as well) have their own 8 step sequencers, so go with the Beatstep Pro, FSS Portland, FSS Brunswick, and Volca Modular and Volca Beats

If you're even a little comfortable with soldering (I mean, you're on Tindie. You probably are?) this is a great little daisychainable summing mixer.
I needed it to sum the volca percussion synths i have on my desk in a little mini-DAWless set up I faff about with when i'm struck with inspiration, and it's absolutely fantastic for what i needed.

I would highly recommend this kit for soldering practice too, it's all thru-hole parts and the instructions are easy to follow.

I purchased this along with their Baby8 module, intending to get soldering practice and make some fun sounds after. The APC was a breeze, while the Baby8 was a little more daunting. It isn't surface mount, but tight ish for a beginner. Documentation on Rakit's website is clear and easy to follow. When I assembled my Baby 8 (with only one switch on the wrong side of the board) the last step always skipped. I emailed Rakit's customer service, and Darren at Rakits worked with me, asking for pictures and troubleshooting. He determined I had a short in a switch and sent me a new kit free of charge! Second unit works perfectly, can't wait to get their other kits.

I purchased this along with their mini APC module, intending to get soldering practice and make some fun sounds after. The APC was a breeze, while the Baby8 was a little more daunting. It isn't surface mount, but tight ish for a beginner. Documentation on Rakit's website is clear and easy to follow. When I assembled my Baby 8 (with only one switch on the wrong side of the board) the last step always skipped. I emailed Rakit's customer service, and Darren at Rakits worked with me, asking for pictures and troubleshooting. He determined I had a short in a switch and sent me a new kit free of charge! Second unit works perfectly, can't wait to get their other kits.

The kit came in a solid box filled with foam and haribo treats :-)

It took me a solid hour to assemble it but I like to take my time and check things thrice.
The sound is totally what you'd expect from this kind of toy, and the cat is impressed :D

I am not a musician but baby8 gives me a lot of joy during the construction as well as when creating strange, noise sounds. The construction is simple, the instructions are clear and intuitive. I will definitely buy something else with the RAKIT logo :).
PS. The stickers were a really nice addition

This is a great little kit and fun to build. Delivery was super quick, and it was well packaged. Following the online instructions made building easy - although the blue-bodied resistors can be a bit hard to read if your lighting isn't great. This is an excellent introduction in to the world of sequencers and synths, although I'm sure it's a very capable bit of kit for those more experienced in such things too.