Tindie

Avatar

KRIDA Electronics

2,741 orders since Aug 15, 2014

47 Reviews

Riga, Riga, Latvia

Ships from Latvia.

Custom Work Available

For any question you can contact me directly via WhatsApp: +37126784872

PWM 16A 3500W Triac Leading EDGE Dimmer 50HZ 60HZ

PWM 16A 3500W Triac Leading EDGE Dimmer 50HZ 60HZ

KRIDA Electronics

$46.95

PWM 8A AC Light Dimmer Module 50Hz 60Hz TASMOTA

PWM 8A AC Light Dimmer Module 50Hz 60Hz TASMOTA

KRIDA Electronics

$14.90

16 Channel I2C Electromagnetic Relay Module IoT

16 Channel I2C Electromagnetic Relay Module IoT

KRIDA Electronics

$36.25

8CH AC LED Light Dimmer Module Controller Board V3

8CH AC LED Light Dimmer Module Controller Board V3

KRIDA Electronics

$25.95

8 Channel I2C Electromagnetic Relay Module

8 Channel I2C Electromagnetic Relay Module

KRIDA Electronics

$24.95

I2C 4CH AC LED Dimmer Module

I2C 4CH AC LED Dimmer Module

KRIDA Electronics

$28.95

4CH AC LED Light Dimmer V2 Module Controller Board

4CH AC LED Light Dimmer V2 Module Controller Board

KRIDA Electronics

$15.95

8 Channel I2C Solid State Relay Module V2.0

8 Channel I2C Solid State Relay Module V2.0

KRIDA Electronics

$24.95

I2C MOSFET Trailing Edge AC Dimmer Light

I2C MOSFET Trailing Edge AC Dimmer Light

KRIDA Electronics

$24.95

16 Channel I2C Solid State Relay Module

16 Channel I2C Solid State Relay Module

KRIDA Electronics

$36.95

PWM10A 2200W Mosfet Trailing Edge Dimmer @ FREEDS

PWM10A 2200W Mosfet Trailing Edge Dimmer @ FREEDS

KRIDA Electronics

$46.95

FreeDS UPSHIELD for PWM16A dimmer Kit

FreeDS UPSHIELD for PWM16A dimmer Kit

KRIDA Electronics

$8.90

View All Products

About

My contact information:

Olegs Bugrovs, Anninmuizas bulvaris 56-69, Riga, LV1069, Latvia

Phone: +371 26784872

Email: krida.electronics@gmail.com

KRIDA Electronics's Page KRIDA Electronics's Channel

Shipping Policies

No country selected, please select your country to see shipping options.

Rates to

Reviews

Review Breakdown

5
13 4
25 3
7 2
2 1
0

Average Ratings

Product: (4.77)

Documentation: (3.70)

Shipping: (4.49)

Communication: (4.32)

Everett | April 15, 2025

Great Product and amazing fast shipping!

For Flipper ZERO IR Blaster Dazzler Bazzuka 940nm

This is a great IR Board for the Flipper Zero. Well Built and work great. Shipping to the US was extremely fast.
I recommend this seller and this product.

Annemarie | April 9, 2025

does not working fine. No help form resseler, no reaction

For WIFI TASMOTA 8 Channel 10 Apms Relay module

@ First site looking very good only channel 8 is not working so it should be 7 channels. Try to contact , only no reaction. so very bad

László | Feb. 13, 2025

Huawei

For PWM 16A 3500W Triac Leading EDGE Dimmer 50HZ 60HZ

I have a Huawei 8KTL-M1 inverter, and I would like to use the generated electricity for my 3-phase 6kW (3x2kW) resistive heating elements. I was thinking about buying 3 units of this device: 'PWM 16A 3500W Triac Leading EDGE Dimmer 50Hz 60Hz.
Will it work this way?
Or will I need other equipment as well?
Thank you very much for your help!

Bernd | Aug. 9, 2024

Good product without support

For I2C MOSFET Trailing Edge AC Dimmer Light

I purchased 3 pieces of these I2C dimmer in order to relieve the ESP32 in esphome - Home Assistant. The boards seem to be well designed and nearly perfectly soldered. During Installation I unfortunately noticed, that there is no support for the dimmer in esphome and a custom component is more or less the only solution to write dimm value into ATmega which finally makes the pwm. On github I found some custom component integration files, perhaps written by Mr. Krida, but they are only designed for the 4 channel I2C dimmer, I tried to adopt these h files without big success as my c-programming skills are about 35 years in the past, but communication works, I always get errors like TimerOne.h not installed or similar (but as far as I know the lib is standard lib in esphome) ... however, I already spent too much time for these boards, so my dream of a pretty I2C bus dimmer solution was burst as the seller offers no support and even can't write an answer e.g. like "I offer no support" or similar, apparently too much customers ;-)

Geoff | March 31, 2024

Good product; well made, works perfectly.

For 8 Channel I2C Electromagnetic Relay Module

I'm using this board to control power amplifiers from an ESP32. Easy to drive using Arduino code.

Is it possible to determine the state of the relays using a micro controller? The documentation doesn't address this.

View All Reviews

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.