Use silent fans in Elegoo Saturn to make it quiet!Designed by Jan "yaqwsx" Mrázek's hardware in Czechia
Elegoo Saturn and Elegoo Saturn 2 are wonderful SLA 3D printers. However, during operation, they are quite loud (54 dB). This is mainly due to the cheap fans. When you replace them, you can easily th…Read More…
Elegoo Saturn and Elegoo Saturn 2 are wonderful SLA 3D printers. However, during operation, they are quite loud (54 dB). This is mainly due to the cheap fans. When you replace them, you can easily the noise from 54 dB to 40 dB. However, Elegoo uses 24 V fans for which there is no (cheap) silent replacement. Therefore, I designed this little module that allows you to connect any standard 12V fan to Saturn. Including the silent ones (Zephir, Noctua). No extra tools, no soldering is required for installation. Just plug in and enjoy the silence...
Be sure to check out my Resin vat cleaning kit for Elegoo Saturn and order both and save on shipping.
If you have Saturn 2, please follow this guide. If you have Elegoo Saturn 1 or Elegoo Saturn S, see the guide below.
The installation is pretty simple and can be completed in less than 10 minutes. You will only need the Allen keys that came with your printers. First, remove the resin vat and build plate. Also, unplug your printer from the power adapter.
Then, unscrew the side cover (unplug your flash drive first):
Peel the cover from the base plate - it is secured by tape. You should see a ribbon cable from the LCD. Disconnect it by turning the black key up (there is a notch for your fingernail in the middle) and then sliding it out.
Now unscrew the screws on the base plate of the printer.
Prepare a box (e.g., Elegoo resin box) on top of which you can lay the top of the printer. Then lift the base plate. And lay it down. Be careful - there are still wires for the stepper motor and the end-stop switch connected!
Disconnect the old fans from the motherboard:
Unscrew the original fans:
Take your Silencer modules and connect them to the replacement fans.
Screw the new fans in and connect them to the motherboard. Be aware of the polarity (the connector has an alignment pin):
Mount the silent fans and use the attached cable tie to tidy up the cables. Now put the base plate back and tighten the screws. Connect the LCD ribbon cable back into the connector and turn the black key on the connector down to secure it. Install the side cover.
You are now ready to plug your Saturn and listen - there's much less noise! Enjoy.
The package contains:
This module was tested with the pre-order unit of Elegoo Saturn and SilentiumPC Zephyr 50 fans. Similarly, it was tested with the pre-order unit of Elegoo Saturn 2.
However, it is compatible with any 12V fan featuring a PC connector (most fans on the market).
Although Elegoo is known for being user supportive (they ship tools to disassemble the printers with the printer) and instruct you to replace the component by yourself, it is possible that installing this modification might void your warranty as this module was not designed by Elegoo. The seller is not liable for any loss, damage, or injury of any kind arising from any use of this module.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Elegoo Saturn 1/S/2 Silencer Kit can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
The products are shipped from Czechia (Europe). Note that if the target country is outside the European Union, you might have to pay import duties or taxes upon reception based on your country's regulations. For tracking my shipments you can use https://parcelsapp.com/en. The packages usually arrive within 7 days (Europe) or 21 days (the rest of the world). When you are in doubt if the package arrived, please check the tracking - it is possible that it is already stored at your post office.
Maxwell | July 3, 2023
Jimmy | May 22, 2022
Muhammad | May 1, 2022
William J | April 20, 2022
Renato | Dec. 10, 2021
Justin | Nov. 6, 2021
Ray | Oct. 4, 2021
Daniel | April 5, 2021
Anthony | March 23, 2021
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!