Reed relay, single pole normally open contacts, 12V activatedSold By Electro-General Stores
Really inexpensive reed relay consisting of a reed switch surrounded by a coil winding. The switch contacts close with as little as 8V applied to the coil. Coil resistance is 1130 ohms, requiring ...Read More…
Really inexpensive reed relay consisting of a reed switch surrounded by a coil winding.
The switch contacts close with as little as 8V applied to the coil. Coil resistance is 1130 ohms, requiring approximately 10mA operating current at 12V.
Due to contact spacing, the relay is not suitable for mains voltage work. Maximum recommended voltage between coil and contact pins is 100V. PCB spacing between coil pins in 5.08mm. Pin spacing between switch pins is 23mm. The four pins are wire-ended, about 6mm long and can be made to fit a through-hole board based on a 0.1" matrix.
The reed switch can easily be removed from the outer coil winding to provide contacts that can be operated by any small magnet.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Reed Relay 12v can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!