Add a 3.5mm jack for a second key or a keyer to your KX2/KX3.Designed by W6IPA in United States of America
Add a second 3.5mm stereo jack to your KX2/KX3 to use for a second key, like a straight Key, or to connect a keyer! You can leave this on and add more protection to your KX2/KX3 by closing a hole w...Read More…
Add a second 3.5mm stereo jack to your KX2/KX3 to use for a second key, like a straight Key, or to connect a keyer!
You can leave this on and add more protection to your KX2/KX3 by closing a hole which has Ground and VCC - and is not used unless you have a a key attached at this location. It is only 3/8" thick, and allows the KX2/KX3 to still fit in Elecraft padded bags.
Assembly is really easy, with one connector being thru hole, and the other SMD but with large pads.
The kit comes with:
Note that in the kit, the 2x2 is hidden in the PCB/Case for protection.
Be very careful with the header. Check for shortcuts as GND and VCC are present on the header. If you solder the connector with the PCB mounted on the KX2/KX3 (e.g for alignment), make sure that there is no battery/power applied to the rig. We are not responsible for any damage that may occur to your device as a result.
The connector works best with a slim stereo extension cable which have small stereo jacks.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when KX Buddy Key can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
Ronald | May 20, 2021
Dan | Sept. 30, 2020
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!