Heat-Set Insert Installation tips for M2, M2.5, M3, M4, and M5 Inserts. Compatible with Hakko FX-888D and Weller SP40NKUS IronsDesigned by Virtjoule in United States of America
Thanks for taking a look at Virtjoule products. We want to make solutions we've created for ourselves available to anyone who is up against the same problems we've solved.
Designed and manufactured in the USA. The original long shank tip for the Hakko FX888D iron. If you see others with these shapes not made by Virtjoule, they are copy cats. Longer shank than other t...Read More…
Designed and manufactured in the USA. The original long shank tip for the Hakko FX888D iron. If you see others with these shapes not made by Virtjoule, they are copy cats. Longer shank than other tips allows you to reach deeper into 3D printed parts and tight corners to install heat-set inserts without touching your iron and melting the plastic.
Installation tip works better than soldering iron tip since conical tips can catch on the insert and accidentally pull the insert out while melting the plastic and ruining the part.
Tip sizes include M2, M2.5, M3, M4, and M5. M2.5 is a popular hole size for Raspberry Pi circuit boards. M3 is a popular size for Arduino circuit boards.
Hakko makes many models of soldering iron. Make sure yours is compatible with the wand for the FX888D iron which is model number FX-8801. This is a T18 style tip and should be compatible with most wands or irons that support a Hakko T18 series tip.
Compact tip cradle included to keep them together when they're not being used. Wide size range gives you lots of flexibility to choose the right insert for your 3D printing project.
Heat set inserts are a great way to improve connection strength between 3D printed parts. However, if you have tried to set heat-set inserts in your plastic or 3D printed part with your soldering iron, you may have had the frustration of pushing the insert in only to have it come right back out stuck to your soldering iron and ruining your part in the process. Most soldering iron tips can catch on the rim of the insert causing it to stick on the iron when you pull the iron out. If you use the "horizontal method" it's hard to know the insert is straight. Virtjoule's insert tips have a vertical wall that solves that problem. The iron pulls right out after pressing the hot insert. Because the shoulder is square it's easier to know if the insert is square in the piece, something that's harder to control with a conical soldering tip. The shank is much longer (0.75") and narrower than what you get with insert tips (only 0.25" long), allowing you to set small inserts into corners of parts without melting the side of the part. This is especially useful if you're mounting a circuit board in a 3D printed box or doing a mounting that requires the insert to come close to the edge of the part. Compatibility with Hakko FX-888D irons and Weller SPS40NUS. These tips are 1.6" (40 mm) long with the tip portion about 0.75" (19mm). There is a 5/32" internal cavity for ceramic heaters. On Weller irons that have a 1/4" cavity and set screw, the 1/4" shank can be extended as far as the set screw will allow. On Hakko FX888D irons, the 0.75" is the reach with 1/4" clearance. Five tips included for sizes M2, M2.5, M3, M4, and M5. Not tested with every possible soldering iron Not all Wellers have 1/4" barrels, so measure yours first. Will not fit the Weller WES51 iron. Inserts and soldering iron not included. Not to be used for soldering. Designed, manufactured, and continuously improved in the USA.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Hakko Heat set insert tips M2,M2.5,M3,M4, and M5 can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
Ben | Aug. 30, 2020
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!