Steal adapter plate for installing bixenon projector AHARON FXR 4.0 into audi a4 b5 (facelift)Sold By Tomas Kovacik
This seller is taking a break until Aug. 7, 2021. Sign up below to get an email when they're back!
Welcome to my store, it is strongly recommended to use shipping with tracking, I cannot be responsible for lost packages without tracking.
Projectors are available only here: https://www.retrofitlab.com/en/xenon-projectors-1/aharon-fx-r-bi-xenon-projectors-40-1.html What is it? Set of two stainless steal adapters for installation of 2...Read More…
projectors are available only here: https://www.retrofitlab.com/en/xenon-projectors-1/aharon-fx-r-bi-xenon-projectors-40-1.html
Set of two stainless steal adapters for installation of 2.5" bi-xenon projector AHARON/Stanley clone FXR 4.0 into audi a4 b5 (facelift) xenon headlights OEM and DEPO. It will fit halogen ones also but this case, you have to install headlight washers and automatic high adjuster system. In case you have halogen headlights you can also install this projector and use H7 bulbs in it.
Adapter for Valeo headlights
Adapter inside headlights, Valeo this time.
Old projectors get burn out after 20years in service. Replacement projector (plus you get bi-xenon functionality) is not much more cheaper then get projector refurbished but it is less time consuming and can be done in few hours. Also you get projectors with high/low beam functionality so better vision in case of high beams and also reflector design is few years newer then stock ones. Only disadvantages over stock ones is that you lose ability to switch light blinds between LHD/RHD.
Old parabola xenon up, halogen down
stainless steal adapter (for Valeo or Depo, choice appropriate using menu on right side)
stainless steal M5x10 screws, hex head, 4peaces
Adapter is cut out from 3mm thick stainless steal. New projector is held on adapter by 3screws provided with kit. Then this assembly is screwed with 3 original screws to housing inside headlight.
New projector in headlight
New projector in headlight
In case you changing original ballast for after market one or you using halogen bulbs, you can order set of 2 aluminum plates for covering holes on bottom side of headlight. In this plate you can cut hole for rubber grommet required to take cables out of light for aftermarket ballast. This option includes:
2 peaces of aluminum plates, with 6holes
6 screws, 4x16 to wood, phillips heads
As option set of 2 modules can brought, these modules will lower your headlights and return them back after you turn your headlights on. Modules are designed to be plug and play, same connectors as in stock headlights, so they can be simply instaled and removed if desired. Modules are small factor ~2x5cm plus cable so day fit inside light without problem.
Link to complete assembly guide (24pages, lot of pictures) will be provided in information email when product is shipped.
Check your current headlights, actual screws used on your headlight may differ.
Long T20 torx or phillips screwdriver to remove old projectors, check what you have in your lights - need standalone one!
H4 hex key
Drill plus 4.5mm drill bit
In case of cover plate installation, sealant (silicon - without acid preferably ) and phillips screwdriver
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Adapter for FXR 4.0 audi a4 b5 can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!