USB – A type connector cable. Use Raspberry PI, PC or Android phone/tablet via OTG to monitor soil moisture, Temperature , ECDesigned by Tinovi, Ships from Latvia
USB Capacitive Soil Moisture/Water content, Temperature, EC sensor Features Android and Raspberry Pi client demo software. Dust and water proof Low cost and easy to use. Fairly accurate rea...Read More…
Android and Raspberry Pi client demo software.
Dust and water proof
Low cost and easy to use.
Fairly accurate readings
Calibration functions for EC and Dielectric permittivity
USB CDC-ACM virtual COM port and 115200 baudrate.
Sensor is equipped with standard 2.4 or 3 meter long USB 2.0 cable. You may connect lots of sensors using USB hub. To identify sensors there is option to set unique 8 character device id and application id. See documentation for more information.
On linux sensor will be detected as /dev/ttyACM0 ... /dev/ttyACMx
For linux permissions settings please consult
On Linux you may use minicom utility to configure sensor.
For windows PuTTY may be used.
We recommend Android mobile application for sensor setup and data reading/storage.
PM-WCS-3-USB data output prints comma separated values (CSV) sequenced as described below.
Dielectric permittivity (ε) (Temperature corrected) resolution: 0.1ε (avg. Tolerance 5%) and range 1 (air) to 80 (water)
Electrical Conductivity (dS/m) resolution: 0.01 dS/m (avg.Tolerance 20%)
Temperature (°C) resolution: 0.1°C(Tolerance 3%) and range: -20 to 60°C
Volumetric Water Content (%) resolution:0.1% (avg.Tolerance 5%) and range: 0 – 100% VWC Note: VWC is calculated from dielectric permittivity by Topp equation (Topp et al, 1980): θ = 4.3 ⋅ 10−6ε3 − 0.00055ε2 + 0.0292ε − 0.053)
Optionally you may setup EPOCH time (Table 3.2.1 command: “time”) in seconds and there will be time parameter added in front. See documentation for more information.
You can write simple script to start log sensor USB data to CSV file.
This sample is written for Raspberry Pi, Debian, Ubuntu linux, before executing script you have to install minicom: sudo apt-get install minicom
sudo stty -F $PT speed 115200 cs8 -cstopb -parenb -echo raw
echo -ne “time $(date +%s)\r” > $PT
echo -ne “millis 5000\r” > $PT
timeout 2s cat $PT
cat $PT > swout.csv 2>&1 &
Get it on Google Play
Android application Features
Setup USB and LoRaWAN soil sensors
Write USB and LoRaWAN sensor data to phone memory
View data on charts and export to CSV
Open Source Android application located there
|Shipping Rate||First item||Additional items|
Latvijas Pasts: Small packet
"Small packet" Shipping is without tracking number and does not have insurance. And if your package gets lost or damaged we are NOT to refund you. Till 2kg packets.
$39.95 $ $39.95
$40.95 $ $40.95
$45.00 $ $45.00
$28.00 $ $28.00
$20.00 $ $20.00
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
VAT registered self emploe