This module supplies power to the RC2014 bus. The input is from 4.75 to 5.25 volts (D.C.) at a maximum of 1 ampere (1000 mA). This switched 5-volt supply can also be used to power external devices from the onboard screw terminal and pin header.

The module also provides a reset signal to the RC2014 bus. This signal is generated from the onboard reset switch (push button), a reset switch on the backplane, or an external reset switch connected to the onboard pin header. A voltage supervisor and reset device is also included, which provides a reliable reset at switch on.

The module has the following features:

• Voltage input is 5 volts (4.75 to 5.25) at up to 1 amp
• Power input via 2.1mm power jack or screw terminals
• On/Off toggle switch
• Power indicator LED
• 5-volt output via screw terminals and header pins
• Front-facing reset button
• Reset indicator LED
• Voltage supervisor and reset device

Documentation

The documentation can be found at www.scc.me.uk or by following the link below.

The Kit

This kit includes all the components needed to make the module, as shown in the first picture. Other modules and backplanes shown in the pictures are not included. You will require tools, solder, and cleaning materials to assemble this kit.

Related items

• Components, spares, and accessories
• SC141 Modular backplane
• SC147 Modular backplane
• SC142 Power supply module, 12V input

Notes

• This product is supplied as a kit of parts that require assembly.
• It is your responsibility to pay any import duty or taxes charged by your home country.
• My products are made in accordance with the "designed for RC2014" labelling scheme.
• RC2014 is a trademark of RFC2795 Ltd.
• This product is designed for hobby use and is not suitable for industrial, commercial, or safety-critical applications.