The set includes:

• 1x 10 meters of garlands on address LEDs WS2812B.
• 1x WLED controller A1-SLWF-02.
• 1x JST Connector to connect 10m WS2812B to controller. .

A1-SLWF-02 Features:

• WLED firmware - hundreds of effects, integrations, customization options, constantly updated functionality; https://github.com/Aircoookie/WLED;
• Allows you to control via web-interface, applications (iOS and Android);
• If you need to integrate into the smart home system Home Assistant - WLED firmware provides automatic integration https://www.home-assistant.io/integrations/wled/;
• Hundreds of effects and settings, including:
• choice of solid glow colors;
• choose from 100+ effects;- adjustment of each effect (brightness, speed, main and additional colors);
• the ability to divide the tape into "segments" and control each segment separately (ie, if you have 10 meters of tape - you can turn on 2 meters, for example, the "rainbow" effect, and the other 8 meters a different effect or color, etc.
• "clock" effect - when the LEDs are dimmed in a circle and will display time, minutes, and seconds visually;
• timer mode;
• The controller is light and convenient - it can be attached on double-sided tape to any surface;
• Connection via type-C from a conventional power supply at 2-2.4A provides a bright glow of 300-500 LEDs (ie 5-10 meters, and if a garland of 10 diodes per meter - it's easy 30 meters)
• Ability to update the firmware "on the air" - without connections, programmers and additional software;
• A screwdriver is included;
• There is a version with a touch button and without a touch button;
• 6-month warranty (Ukraine); Return and exchange (only for buyers in Ukraine) within 14 days (cost of return at the expense of the buyer)

Garland on addressable LEDs WS2812B features:

• total length 10 meters;
• The distance between the diodes is 10 cm, 10 LEDs per meter;
• 360-degree glow angle.
• Protection class IP67 (moisture protection test below in the video);
• Temperature modes: -20 to +50 (test "night at -17" below in the video);
• The wire is flexible; it allows to use in any form (eaves, a Christmas tree, hanging on curtains, etc.)
• The wire is translucent, quite invisible, and looks OK on the whole;
• Power 5V (charging from the phone is enough for 20 meters), 5V means safe for anyone (especially important if animals or small children are at home).
• Color sequence for controllers setup is BGR;

How to connect and use SLWF-02 controller:

• Turn on the power of the controller by connecting it to the type-C cable;
• Connect the addressable LED "+" of the strip to the "+" controller, "-" strip to "-" of the controller, and the signal cable of the strip to the middle connector of the controller. Use the screwdriver from the kit for easy connection;
• Connect from your phone or computer to the WLED-AP WiFi network using the password wled1234;
• From the browser, go to 4.3.2.1
• Go to the "To the controls" section. You can manage the strip.
• To adjust the number of LEDs and the RGB sequence, go to the menu Config -> Led preferences.
• If you have a version with a touch button, the button actions are as follows:
• Short press - on / off;
• Long press (hold) - switching effects;
• If you want the strip to always turn on with the same effect/color after pressing the button, you must set "FX = 0 & G = 224 & R = 255 & B = 160 & T = 2" in the Preset menu in the Onoff section, where FX = 0 is the sequence number of the effect (solid glow), GRB = colors that the ribbon will turn on after pressing, T = 2 commands indicating on or off.

What makes it special?