Bring your own designs to life using this prototype board.

Available in purple, black and blue, this prototype board is electrically laid out the same as a breadboard. Make your projects permanent by simply transferring your components from your breadboard, preserving their layout and solder into place.

The tracks are exposed on the underside of the board so can easily be cut if required.

Just like a breadboard, the top and bottom rails run horizontally and can be used for power. Electrically separated, it is possible to run different voltages along the top and bottom power rails, however, the top and bottom rails can be linked together by soldering two links.

Spec

• Transform your breadboard projects into a permanent state
• Cuttable tracks
• Links enabling power rails at the top and bottom of the board to be linked or operated independently
• Standard 2.54 mm pitch
• Double-sided through-hole plated pads
• Four mounting holes (3 mm diameter)
• Three colours; purple, black and blue
• Size; 55.4 x 48.3 mm

Below is an example of how the board can be used. In the photo is a 555 astable circuit that flashes two LEDs assembled on the purple prototyping board.