Low cost open hardware driver board for controlling two stepper motors over WiFi, and needs no Arduino/Raspberry Pi/etcDesigned by Climbers.net Electronics in United Kingdom
If you want to control a stepper motor then you could use a Raspberry Pi or Arduino with a suitable motor hat/shield, and there are some excellent ones out there. But the costs quickly add up, espe...Read More…
If you want to control a stepper motor then you could use a Raspberry Pi or Arduino with a suitable motor hat/shield, and there are some excellent ones out there. But the costs quickly add up, especially if you need 2 stepper motors and WiFi. This simple board is my solution, joining together the well-proven EasyDriver and ESP-12F modules.
Supplied in kit form with the surface-mount soldering already done for you, and just easy through-hole soldering left to finish. If you can solder the headers onto a Raspberry Pi Zero or Arduino board, then you’ll have no trouble putting this together.
The photo above shows exactly what is included in the kit. You’ll need your own power supply, stepper motors, limit switches (optional) and wiring.
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!