This store is about the rusefi.com DIY engine control unit
That's all the hard-to-get pieces you need to solder yourself a Frankenso board.
x1 Frankenso board
x12 low-side VNS14NV04 or similar
x4 op-amp mcp6004-e/sl
x3 high-side TC4427
x2 2x25 header
x2 SD card socket
x1 VR INTERFACE MAX9926
x1 CAN interface SN65HVD230
x3 radial Inductor
x2 CAP TANT 220UF
x1 IC REG BUCK 5V 3A
x1 CAP ALUM 680UF
x4 misc diodes for power supply
It's relatively advances soldering, I strongly recommend using soldering paste. Good luck and see you on http://rusefi.com/forum
PS: if in doubt of SMD soldering, including fine-pitch SMD soldering, I strongly recommend considering fully assembled boards. Over 75% of kits are never assembled.
Currently shipping version 0.5 https://svn.code.sf.net/p/rusefi/code/trunk/hardware/rusefi_hardware_history/frankenso_rev00.50/frankenso/
|Shipping Rate||First item||Additional items|
United States Postal Service: Medium Box
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!