2019 Latest PortaPack + HackRF One SDR + Metal Case + TXCO + Havoc FirmwareSold By rosymaker
The hackrf one is inlcuded and it is open source and made in china package including : 1 pcs portapack with hackrf one and a case ，antenna new PORTAPACK with 0.5ppm TCXO clock FOR HACKRF ON...Read More…
the hackrf one is inlcuded and it is open source and made in china
package including : 1 pcs portapack with hackrf one and a case ，antenna
new PORTAPACK with 0.5ppm TCXO clock FOR HACKRF ONE SDR Software Defined Radio with metal case working from -40 ~ 100 Integrated 0.5ppm TCXO
Add a PortaPack H1 to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack H1 attaches to your HackRF and adds a LCD, navigation controls, headphone jack, 0.5ppm clock reference, real-time clock, micro SD card slot, and custom aluminum case.
Just add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware)
The PortaPack is open-source -- hardware and firmware. The source files are published on GitHub. Contributions, forks, and bug reports are welcome!
SPECIFICATIONS 2.4 inch, 240 x 320 RGB LCD Four-way arrow keys, rotary jog wheel, and select button. Headphone/microphone jack, compatible with recent Samsung and Apple mobile headsets (possibly others).
Micro SD card slot for data and code storage
SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall.
Wideband (18MHz) spectrum analysis and waterfall. Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).
HackRF mode runs HackRF firmware for use with host computer SDR software. PPM calibration for more accurate tuning. Sleep mode saves power by turning off just the display. You may also find the Furrtek HAVOC firmware very interesting!
Some assembly is required. The assembly steps are documented in the support wiki and videos.
Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into "HackRF Mode".
PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.
PortaPack requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.
The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.
1.TFT240*320 screen (model: ER-TFT024-3)，touchscreen 2. navigation switch (TSWB3NCB222)
7.4 layer gold plate
8.ROSH process (exported to Europe and America)
The latest version is updated with the latest documents in 2018.10 month
hackrf one :Features
half-duplex transceiver operating freq: 1 MHz to 6 GHz supported sample rates: 2 Msps to 20 Msps (quadrature) resolution: 8 bits interface: High Speed USB (with USB Micro-B connector) power supply: USB bus power software-controlled antenna port power (max 50 mA at 3.3 V) SMA female antenna connector (50 ohms) SMA female clock input and output for synchronization convenient buttons for programming pin headers for expansion portable
|Shipping Rate||Ships From||First item||Additional items|
China Post: Standard Ground Rate
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!