• 🌞 [ BALANCE ROBOT ] : Thanks to the MPU6050 acceleration and gyro sensor on it, it is a robot that constantly tries to keep itself in balance. PID control software is used while developing the software of the balance robot. In this way, you can improve yourself in the field of PID control.
• 🔰 [ ALL IN ONE PACK ] : There are two 6V 250Rpm plastic geared DC motors on the platform. In addition, the motor driver, Robotistan Uno R3 and all electronic parts that allow you to do PID Control are included in the kit.
• ⭐[ ROBOTISTAN UNO R3 ] : Balance Robot Kit comes with Robotistan Uno R3 on-board CH340 chip compatible with Arduino, which is a very popular and preferred development board type in electronic projects. This version of the board does the same work. However, it provides you a cheaper option to get started with the maker ecosystem.
• ⏰ [ EASY TO BUILD ]: Pieces are created to be easy-built. There is no kind of soldering process, pieces have screwed connections. Just bring them together, look at the manual and build it ! Enjoyable like doing a puzzle. Every necessary tool and parts in the kit. Suitable for all ages.
• 💯 [ MAKE YOUR OWN SMART ROBOT ]: You don't have to pay for expensive toys anymore! You can make your own toy robot car yourself. If you want, you can control your robot from any device with Bluetooth by adding some modules. Not to mention the pleasure you will get in the building stages.

Do you want to improve yourself a little more in robotics? This project may be for you because it will challenge you a little more than other robot projects.

In this project, you only need to balance the balance robot with two wheels, for this you will learn PID control. You will keep your robot in balance with the MPU6050, which has an acceleration and gyro sensor.

Balance Robot Kit Contents :

• 1 x Robotistan UNO R3 Clone USB Cable as Gift - (USB Chip CH340)
• 1 x L298N Dual Motor Driver Board with Voltage Regulator (Red PCB)
• 1 x MPU6050 6 Axis Acceleration and Gyro Sensor
• 2 x 6 V 250 RPM Engine and Wheel Set
• 1 x 6 AA Battery Holder
• 4 x 45 mm M3 Metal Female-Male Spacer (Standoff-Spacer-Riser)
• 20 x M3 Nut
• 25 x M3 10 mm YSB Star Cylindrical Head Metric Screw
• 4 x M3 30 mm YSB Star Cylindrical Head Metric Screw
• 1 x 40 Pin Detachable Female-Male M-F Jumper Cable-200 mm
• 1 x 40 Pin Detachable Male-Male M-M Jumper Cable-200 mm
• 4 x 6 mm M3 Metal Female-Male Spacer (Standoff-Spacer-Riser)
• 2 x M2 screws
• 4 x M2 nut
• 1 x Plexi pieces

The product does not contain batteries. It is recommended to use 6 AA batteries.