Finalist in Hackaday Prize 2017 and successful IndieGogo crowdfunding campain runner, this is an open source compact radiation dosimeter that has an LCD and thus allows mobile use but also comes with an Ethernet adapter so it can do radiation monitoring (uRADMonitor compatible). Named 'KIT1', it exists due to popular demand. Now, all those asking for a uRADMonitor Kit have a nice alternative in this device. This circuit uses a single layer PCB and only trough hole components, making the construction so much easier for all the DIY enthusiasts. It supports adding more sensors and the backend server offers API for easy data access. Build charts in just a few steps, and see your data change. The units here on Tindie are preassembled.
I was amazed of the IOT potential even before this thing had a name. Connecting a gadget to the Internet without a computer was intriguing, and opened new exciting opportunities. Back in 2011 I build my first such device using an enc28j60 to control a power socket via the Internet. Then in 2012 I built the first IOT environmental monitor, just a bunch of sensors connected to the Internet and installed on the outside of my home:
This was featured on Hackaday.com.
My idea was to continue building on the potential of this new technology. I designed new devices which could be but into production, equiped with sensors and Internet connectivity to form the World's first "Global radiation monitoring network" or uRADMonitor. So here is the KIT1, an excellent Open Source IOT Dosimeter, that can be used both as a portable detector, but also as a monitoring station to upload readings over the internet. By default it uses a Geiger tube to detect radiation, but more sensors can be added, making this a general purpose IOT Platform. The design is 100% open source on Github, including the code and circuit diagram. Designed for makers, this circuit will provide excellent performance comparable to commercial detectors or better. And as a bonus, the extension slot allows adding more sensors.
Intended as open source for those who want to build their own dosimeter with their own tools, this is an IOT device that can take several sensors and have the data centralised online. The readings are accessible via a RESTful API, or by connecting directly to the KIT1 unit, in the local LAN. This is useful when you want to monitor several locations, and plot charts or analyse the data. By default it comes with a SBM20 tube to measure Gamma radiation and has an extension slot (v1.2.105) to add additional sensors. The code on GITHUB offers support for the Bosch BME280 sensor by default. With the integrated Ethernet connectivity will send all measurements automatically via the Internet, to the uRADMonitor server, or to any backend you want. You don't need a computer, this tiny devices speaks TCP/IP by itself! Add a battery and it can also be used as a portable dosimeter, showing all measurements on the LCD. The community helped improving the design, with very many custom variants proving the utility of this IOT device, see the pictures in this project log.
uRADMonitor is Big Data. Hundreds of detectors worldwide are collecting measurements every minute, and the server deals with millions of entries in its database every day. The database holding KIT1 data was designed for efficiency: only the minimum data goes in. One reason for open sourcing was to allow customising the KIT1 units with additional sensors. I had to adapt the server backend in this regards, and now there’s an expandable list of parameters that can be uploaded. Then there’s the data accuracy which needs to be guaranteed to a reasonable degree by supervising and testing the hardware, something impossible with open, remote constructions. Making the server decide if the data is genuine or just some random useless bits was not an easy task. Last but not least, here comes the security. Initially, open source can be a source of vulnerabilities of the exposed system. I had to make sure the new open communication protocol is safe to use. I've implemented API Authorisation for all data uploads generated by the Open Source KIT1 units. Go to the dashboard, and create an account if you don’t have one already. You’ll need to use the user-id and the user-key listed there with your new uRADMonitor KIT1. If you go for the stock firmware, then you won’t need them. Tindie units ship with the stock firmware. You can update it to the latest firmware on Github if you wish. Here's what others did, see the KIT1 forum.
The KIT1 is an IOT device, so you can see the data it generates in real time. The advanced firmware and the powerful server implementation allow 3 methods to access the data: 1. Programatically, via the uRADMonitor Cloud API . Please see details on the dashboard or in this quick example. 2. Via the dashboard, in CSV or JSON format, see the DATA tab. 3. The uRADMonitor units with Ethernet or Wifi connectivity (including the A3) come with an embedded micro web server, that can be used to access the readings directly in your LAN, by connecting to the unit. Here's what others did with this feature: Setup 1 Setup 2 Setup 3 Setup 4 Setup 5 Setup 6
The KIT1 and the entire uRADMonitor project is about giving uncensored environmental info back to the people. By purchasing a device you get yourself a nice automated dosimeter to monitor your location 24/7 but you also support the work and research invested in this community project, helping it move further.
|Shipping Rate||First item||Additional items|
Free Shipping: Regular Shipping with Tracking
The KIT1 will be shipped from China, where I do the high volume manufacturing.
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!